Reference
Changing the Remote Control’s RF IR Settings
All devices are set up by default to work with IR signals. To be able to operate one or more devices with RF signals, you have to change the Remote Control’s RF IR settings for those devices.
1Make sure the Device tab is active.The Device tab is active when the name of a device is displayed at the right side of the touch screen .
2Tap the Mode button
and select RF IR. The Device menu appears.
3Select the device for which you want to change the RF IR settings.
The RF IR settings appear. The reversed color label on the button ndicates that the selected device is currently operated with IR signals.
4Tap RF.The RF IR settings for the selected device are changed from IR to RF.
When you have several RF Extenders to operate devices, you have to assign the correct Extender ID to the selected device.Continue with Step 5.
When you have only one RF Extender, you can accept the default settings for the Extender ID and the Channel. Skip to step 7.
Note | The ID on the RF Extender has to match the |
Extender ID on the Remote Control.
5Make sure the EXTENDER button is active. The button is active when the button label is red.
6Press the Left and Right Hard buttons to
change the Extender ID. The Remote Control offers 16 Extender ID’s.
7Tap Accept to save the RF IR settings for
the selected device or Tap Cancel to return without changing the RF IR settings for the selected device.
User Guide |
48