Marantz RC9200, RC5200 manual Recording a Macro Step By Step

Reference

User Guide

Delay - A delay counts as one of the 255 macro steps. Delays can be adjusted in 1/10th of a second intervals to be any value between .1 second and 99.9 seconds.

Adjusting Delays - When a delay is “Selected,” you can adjust the delay with the plus and minus buttons.

Recording A Macro Step By Step

To record a macro, there must be at least one macro group in the Macro menu. To create these groups, see page 35-40. Read the instructions for Adding Device Groups (see page 35-36), then note the differences when Adding Macro Groups (see page 39).

1Navigate to the Macro side by tapping the Macro icon.

2Open the macro menu and select a macro group.

3 Switch to Edit mode via the Mode button .

Empty macro buttons appear in the macro control panel.

4Tap the button you want to use for your macro.

5Enter the sequence of commands you want to record.

You can navigate to whatever control panel you want, just as you do in Use mode.

6Tap the Macro menu button.

The contents of the macro appear. You can now play, edit or close the macro.

7Press the Left button to close the macro.

A confirmation screen appears where you can save or cancel the macro.

8Tap Save and assign a label to the macro.

44