Marantz RC5200, RC9200 manual Editing macros, Recording a Device Action Source Switching or Input

Reference

User Guide

The macro is ready to be used.

There are two extra commands you can record as any step in a macro:

Recording a Device Action (Source Switching or Input)

To record a Device menu item containing a source switching command, open the Device menu, hold down the Right button (labeled Action) and tap the device you want to switch to. This action places the entire Device Action in the Macro.

Note	If a macro has been recorded as a Device Action, you can
	include all of it as a single step in another Macro, effectively
	nesting one macro inside another. However, the last step of any
	Device Action is a jump to the Device’s Main panel. This step is
	not included in the nested macro.

Jumping to a device control panel

To jump to any device panel, first navigate to the device you want (using the Device menu), then select the exact device panel you want (using the scroll arrows-not the tab buttons), then open the Device menu, hold down the Left hard button (labeled Device) and tap the device you want. After you’ve recorded a jump, check your Edit window. You’ll see that you recorded both a jump and a device action. If you do not want the device action, delete it.

Editing macros

You can edit any macro you have recorded.

1Open the macro group that contains the macro.

2Switch to Edit mode via the Mode button .

3Tap the macro you want to edit. The contents of the macro appear.

4Edit the macro.

You can move or delete listed commands, or you can record new commands.

You can also add delays to the macro (for example, to insert a short pause between turning on a device and sending

45