Marantz RC9500 manual Programming Touch Screen Buttons

Page 33

DFU RC9500 Ver1_2.qxd 5/28/2004 10:33 AM Page 33

Reference

User Guide

You cannot program the buttons in the Device Overview page directly. You have to program them using “Learn device action” function. (see page 30)

The RC9500 also offers empty (non-command programmed) control buttons which you can program and label as existing buttons. They are visible in USE mode as grayed-out.

Normal Button	Grayed-out Button
(Command programmed)	(Non-command programmed)

Programming Touch Screen Buttons

1Tap and hold the MODE icon in the LOWER TOOL BAR more than 3 seconds. Mode Menu page appears.

2Tap the “LEARN” button to switch to the LEARN mode.

3Select the “Learn button” button and then navigate to the device page which contains the button you want to program.

4Point the device’s original remote control to the RC9500’s learning eye as shown on page 28.

5Tap the button you want to program on the RC9500.

“Learning” will be displayed on the DEVICE OVERVIEW button and the button’s color is reversed.

6Press and hold the corresponding button on your device’s original remote control.

If the RC9500 has learned the command successfully, “OK” appears on the Device Overview button. You can release the button you’re holding. If the RC9500 has not learned successfully, you hear a short buzz and “Failed” appears.

7Program all other buttons you want and relabel them if necessary. (see page 32)

29

Image 33

Contents Model RC9500 User Guide Declaration of Conformity N V04ECRC9500 FCC CompliancyDFU RC9500 Ver12.qxd 5/28/2004 1032 AM Automating Your Home Theater With The Marantz RC9500 RC9500 Remote Control User GuideTable of Contents Marantz RC9500 IntroductionIntroduction BatteryInstalling the Battery Pack Charging the RC9500 Getting Started Using the BacklightActivating the RC9500 Turning on the Touch ScreenNavigating the RC9500 ModesNavigating the Devices Device Overview Overview Navigating the PagesOther Navigation Using the Hard Buttons Using the Soft ButtonsSending commands Operating a DeviceTo exit the Information Setup PagesFirst Setup Setting Time and Date Changing the Time FormatChanging the Time „ To Change the Day Changing the Date„ To Change the Month „ To Change the YearSo on, you have to switch to the appropriate mode Mode MenuTo switch to another mode Adjusting the Touch Screen BrightnessCustomizing your RC9500 IntroductionCloning All Your Existing Remotes Congratulations Complex Operation? Macro or Help Tip Programming Help List Tap Copy without RC codes when it prompted. seeMacro/Page Jump Capability Any Button Performs Macros/JumpsMacros Perform Jumps to Any Device Macros Can Contain Delay and Beep Between Steps Macros Send Commands To Your SystemProgramming Macros & Page Jumps Customizing Your RC9500 You are now a Home Theater Automator Reference Learning IR commandProgramming Touch Screen Buttons Programming the Hard Buttons per Device Programming The Device Buttons Device ActionReference Labeling a Button Labeling Buttons, Pages and DevicesReference Labeling a Labeling a DeviceDescription for the Device Template Adding Devices„ Create New Device „ Copy Existing Device Device TemplateReference Creating a New Device Step by Step Copy Existing Device Deleting a Button Deleting Buttons and DevicesDeleting a Device Moving Devices Programming Macros Adjusting DelaysMacro Page Notation DVDTap the Macro to Button button to proceed to the next step Recording a Macro to a Operation Button Step By StepRecording a Jump to a Device Recording a Device Action Source or Input SwitchingEditing Macros Adding a Timer Creating and Editing TimersActivating Timers Labeling a Timer Deleting a TimerEditing a Timer Define the Repeat Settings Set the Start DateSet the Start Time Setting the Start Date Setting the Start Time or Stop TimeTo change the Start Date Defining the Start Action or Stop Action Defining the Repeat Setting„ Daily „ Weekly Changing the IR / RF Settings Using the RC9500 with Radio FrequencyReference Choosing Another Channel SoftwarePC Requirements Internet FunCleaning the RC9500 Maintaining Your RC9500Important Notice General Problems TroubleshootingProgramming Problems Recharging Problems Frequently Asked Questions How do I calibrate the Touch Screen? Overview of Symbols Overview of Symbols Display SpecificationsIndex VolumeDSS ADD Operating Other Service and Support Service and SupportUpdates and New Products Memo Japan