Marantz RC9500 manual Programming The Device Buttons Device Action

Page 34

DFU RC9500 Ver1_2.qxd 5/28/2004 10:33 AM Page 34

Reference

8Return to the Mode Menu page by tapping label in the

LOWER TOOL BAR.

9Return to USE mode by pressing the Left Function button labeled “Exit” via the Mode Menu page.

Programming The Device Buttons (Device Action)

Note When you teach a command as a Device Action, this command will be sent when you select the Device from the Device Overview page.

Remember, the only way to NOT issue this command is to reveal the Device Overview page, press and hold the Left or Right Function buttons (now labeled “No IR”) and select the device.

1Tap and hold the MODE icon in the LOWER TOOL BAR more than 3 seconds. Mode Menu page appears.

2Tap the “LEARN” button to switch to the LEARN mode.

3Select the “Learn device action” button.

The Device Overview page appears.

4Complete steps 4 to 9 in “Programming Touch Screen buttons” on page 29. Instead of tapping a button on the Touch Screen, press the Device button you want to program.

Programming the Hard Buttons per Device

The Hard buttons are defined as the five hard buttons next right to the Touch Screen (Channel Up/Down, Volume Up/Down, Mute) and the ten buttons below the Touch Screen (Cursor Up, Down, Right, Left, Menu, Enter, Exit, HOME, Left and Right Function buttons).

User Guide

30

Image 34

Contents Model RC9500 User Guide FCC Compliancy Declaration of Conformity N V04ECRC9500DFU RC9500 Ver12.qxd 5/28/2004 1032 AM RC9500 Remote Control User Guide Automating Your Home Theater With The Marantz RC9500Table of Contents Introduction Marantz RC9500Battery IntroductionInstalling the Battery Pack Charging the RC9500 Activating the RC9500 Using the BacklightGetting Started Turning on the Touch ScreenModes Navigating the RC9500Navigating the Devices Device Overview Navigating the Pages OverviewOther Navigation Sending commands Using the Soft ButtonsUsing the Hard Buttons Operating a DeviceSetup Pages To exit the InformationFirst Setup Changing the Time Format Setting Time and DateChanging the Time „ To Change the Month Changing the Date„ To Change the Day „ To Change the YearMode Menu So on, you have to switch to the appropriate modeAdjusting the Touch Screen Brightness To switch to another modeIntroduction Customizing your RC9500Cloning All Your Existing Remotes Congratulations Complex Operation? Macro or Help Tip Tap Copy without RC codes when it prompted. see Programming Help ListAny Button Performs Macros/Jumps Macro/Page Jump CapabilityMacros Perform Jumps to Any Device Macros Send Commands To Your System Macros Can Contain Delay and Beep Between StepsProgramming Macros & Page Jumps Customizing Your RC9500 You are now a Home Theater Automator Learning IR command ReferenceProgramming Touch Screen Buttons Programming The Device Buttons Device Action Programming the Hard Buttons per DeviceReference Labeling Buttons, Pages and Devices Labeling a ButtonReference Labeling a Device Labeling a„ Create New Device „ Copy Existing Device Adding DevicesDescription for the Device Template Device TemplateReference Creating a New Device Step by Step Copy Existing Device Deleting Buttons and Devices Deleting a ButtonDeleting a Device Moving Devices Macro Page Notation Adjusting DelaysProgramming Macros DVDRecording a Macro to a Operation Button Step By Step Tap the Macro to Button button to proceed to the next stepRecording a Device Action Source or Input Switching Recording a Jump to a DeviceEditing Macros Creating and Editing Timers Adding a TimerActivating Timers Deleting a Timer Labeling a TimerEditing a Timer Set the Start Date Define the Repeat SettingsSet the Start Time Setting the Start Time or Stop Time Setting the Start DateTo change the Start Date Defining the Repeat Setting Defining the Start Action or Stop Action„ Daily „ Weekly Using the RC9500 with Radio Frequency Changing the IR / RF SettingsReference Software Choosing Another ChannelInternet Fun PC RequirementsMaintaining Your RC9500 Cleaning the RC9500Important Notice Troubleshooting General ProblemsProgramming Problems Recharging Problems Frequently Asked Questions How do I calibrate the Touch Screen? Overview of Symbols Overview of Symbols Specifications DisplayVolume IndexDSS ADD Operating Other Service and Support Service and SupportUpdates and New Products Memo Japan