Controls & Displays
Front panel
1 | 2 | 3 | 4 |
SUPER AUDIO CD/DVD CHANGER VC6001
STANDBY |
POWER
DISC
PLAY | STOP | PAUSE |
1 | 2 | 3 | 4 | 5 |
5 | 6 7 8 | 9 | 0 |
3
English
1STANDBY indicator
•Lights when the unit is in standby.
2Disc tray
•Place the disc here.
3
•Lights when playing a
40 (OPEN/CLOSE)
•Press to open and close the disc tray.
5POWER ON/STANDBY
•Press to turn the power on, and press it again to enter STANDBY mode.
6DISC (1, 2, 3, 4, 5)/LEDs – page 15
•Use to select and directly play back the preferred disc.
•Each LED flashes green when the button is selected.
7
•Lights when the player detects a Super Audio CD signal.
8
•Lights when the player detects a
9Display
•Operation indications are displayed here.
10AUDIO EX
•Lights when the AUDIO EX is activated using the AUDIO EX button on the remote control.
•The sound quality of analog audio output is improved by turning off analog video signal output and the front panel display.
•It is applied to CDDA, Super Audio CD, DVD Audio and DTS CD in Play mode.
11HDMI indicator
•When the connected device is HDMI/DVI compatible, the light flashes red.
12HDMI – page 46
•The HDMI on/off state toggles when pressed for three seconds or more. When on, the HDMI indicator is lit.
•Pressing this button while HDMI is enabled displays the current resolution. Pressing this button again while the resolution is displayed allows you to select the resolution in the sequence below:
480p Æ 576p Æ 720p Æ 1080i Æ 1080p Æ 480p
134 /1
•Press to skip reverse title/group, chapter, or track. You can also press and hold this button for Fast Reversed.
14¡/¢
•Press to skip forward title/group, chapter, or track. You can also press and hold this button for Fast Forward.
153 (PLAY)
•Begins playing the disc play.
167 (STOP)
•Stops playing the disc play.
178 (PAUSE)
•Pauses playing the disc play.
13