Marantz BD7004 manual
Audio signals output from Digital OUT Coaxial

Connections

•If “BD Audio Mode” is set to “HD Audio Output” or the BD title does not have secondary or interactive audio, the audio will be output as shown in the table.

•If the “BD Audio Mode” is set to “Mix Audio Output” and the BD title has secondary or interactive audio, the audio will be output as follows:

*1 Dolby Digital or Multi PCM (Only the independent substream is decoded.) *2 Dolby Digital or Multi PCM (Only the Dolby Digital substream is decoded.) *3 DTS or Multi PCM (Only the core substream is decoded.)

*4 As shown in the table (Only the independent substream is decoded.) *5 As shown in the table (Only the Dolby Digital substream is decoded.) *6 As shown in the table (Only the core substream is decoded.)

•If the connected device is not compatible with the HDMI BITSTREAM, audio will be output as Multi PCM or 2ch Downmix PCM depending on the capability of the connected device, even if you select “HDMI Multi(Normal)” in“HDMI Audio Out” setting. Refer to page 33.

Copyright protection system

To play back the digital video images of a BD/DVD via an HDMI connection, it is necessary that both the unit and the display device (or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital content protection system). HDCP is copy protection technology that comprises data encryption and authentication of the connected AV device. This unit supports HDCP. Please read the user guide of your display device (or AV amplifier) for more information.

* HDMI: High-Definition Multimedia Interface

Note

•When using HDCP-incompatible display device, the image will not be viewed properly.

•The audio signals from the HDMI jack (including the sampling frequency, the number of channels and bit length) maybe limited by the device that is connected.

•Among the monitors that support HDMI, some do not support audio output (e.g. projectors). In connections with device such as this unit, audio signals are not output from the HDMI output jack.

Digital Connection to an AV Amplifier with Built-in Decoder

digital audio coaxial cable

audio

DIGITAL AUDIO INPUT

DIGITAL OUT

COAXIAL

AC IN

DIGITAL OUT

COMPONENT VIDEO OUT VIDEO OUT FLASHER

IN OUT

COAXIAL

FL

C SL

SBL

STRAIGHT

2ch AUDIO OUT

CABLE

R L

NETWORK

RS-232C

COAXIAL

digital audio coaxial

HDMI OUT

FR

SW SR

SBR

7.1ch AUDIO OUT

input jack

this unit

Audio signals output from DIGITAL OUT (COAXIAL)

When both HDMI and DIGITAL OUT is connected to other devices, the audio signals currently output from the HDMI OUT will be output from the DIGITAL OUT jack as well, except that HDMI 2ch signal will be output from HDMI OUT jack, when connected device does not support Dolby Digital and DTS. < When HDMI is not connected or “Audio Mute” is selected···>

ENGLISH

			Connections
When HDMI is not connected or the “Audio Mute” is selected in “HDMI Audio Out” setting, the audio
signals output from DIGITAL OUT changes depending on the “Digital Out” setting. Refer to the				Introduction
following table.
To set “Digital Out”, press [SETUP], then select “Quick” A “HDMI Audio Out” A“Audio Mute” or
“Custom” A “Audio” A “HDMI Audio Out” A“Audio Mute”.
Disc type	Audio recording format	“Digital Out” setting
		Bitstream	LPCM
	Dolby Digital	Dolby Digital	2ch Downmix PCM
				Connections
	Dolby Digital Plus	Dolby Digital	2ch Downmix PCM*1
	PCM	2ch Downmix PCM	2ch Downmix PCM
BD-Video	Dolby TrueHD	Dolby Digital	2ch Downmix PCM*2
	DTS	DTS	2ch Downmix PCM
	DTS-HD	DTS	2ch Downmix PCM*3
	Dolby Digital	Dolby Digital	2ch Downmix PCM
DVD-Video
	DTS	DTS	2ch Downmix PCM
	PCM	2ch PCM	2ch PCM	Playback
DTS-CD		DTS	2ch Downmix PCM
AVCHD	Dolby Digital	Dolby Digital	2ch Downmix PCM
	PCM	2ch Downmix PCM	2ch Downmix PCM
DivX®	Dolby Digital	Dolby Digital	2ch Downmix PCM
	MP3/ MP2	2ch PCM	2ch PCM
				Function
audio CD/ MP3/ Windows Media™ Audio		2ch PCM	2ch PCM
• This table applies only when HDMI is not connected or the “Audio Mute” is selected in “HDMI Audio
Out” setting.
• If “BD Audio Mode” is set to “HD Audio Output” or the BD title does not have secondary or				Setup
interactive audio, the audio will be output as shown in the table.
• If the “BD Audio Mode” is set to “Mix Audio Output” and the BD title has secondary or interactive
audio, the audio will be output as follows:
*1 Only the independent substream is decoded.
*2 Only the Dolby Digital substream is decoded.
*3 Only the core substream is decoded.				Others
Note
• In order to output PCM signal from DIGITAL OUT jack while outputting the HDMI audio signal,
set “BD Audio Mode” to “Mix Audio Output” and set “HDMI Audio Out” to “HDMI Multi(LPCM)”.

Cables not included.

Please purchase the necessary cables at your local store.

14

ENGLISH