Marantz BD7004 manual Digital Out Setting, Speaker Setting, Function, Drc, Setup

Function Setup

Setting items	Options
7.1ch Audio Out	Multi Channel*:
Sets the audio format for the audio	The multi-audio signals are output from the 7.1ch
	AUDIO OUT. Refer to pages 34-36 for speaker setting
output from the 7.1ch AUDIO OUT.
	options.
	2 Channel:
	Down-mixed 2-channel audio signals are output from
	the 7.1ch AUDIO OUT jacks.
Down Sampling	On:
Sets the digital audio output when	PCM signals are converted to 48 kHz for output.
playing BD or DVD recorded in	• Set to “On” when using digital connections to an AV
PCM.	amplifier that is not compatible with sampling
	frequencies of 96 kHz.
	Off*:
	For BD or DVD recorded in PCM without copyright
	protection, 2-channel audio signals up to 192 kHz are
	output as PCM signals with no conversion.
DRC	Auto*:
Sets whether to compress the	When the discs that are recorded in the Dolby TrueHD
range of sound volume (Dynamic	format is in playback, this unit detects DRC setting of
Range Control) when Dolby Digital,	the disc and set the DRC setting of this unit to “On” or
Dolby Digital Plus or Dolby TrueHD	“Off” automatically.
audio is played back.
	Off
	On

•Settings with (*) are the default.

•Quick menu consists of the setting menus frequently used, and they are accompanied with mark.

•Under following circumstances, “HDMI Multi(Normal)”, “HDMI Multi(LPCM)” and “HDMI 2ch” is not available.

-HDMI cable is not connected to HDMI OUT jack.

-Connected display device is off.

-Connected display device is not compatible with audio output.

Digital Out Setting

When the “Audio Mute” is selected in “HDMI Audio Out” setting, audio signal of the HDMI is muted and the audio signals output from DIGITAL OUT changes depending on the “Digital Out” setting.

<“Digital Out” setting>

Audio A HDMI Audio Out A Audio Mute

ENGLISH

Function Setup

Bitstream*:	Introduction
When playing back discs recorded in Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or
DTS-HD, the corresponding core stream (Dolby Digital or DTS) are output.
LPCM:
Full decoded 2ch PCM signal will be output from DIGITAL OUT.
• This setting is not effective when the HDMI audio signal is output.
• When both HDMI and DIGITAL OUT is connected to other devices, the audio signals currently
output from the HDMI OUT will be output from the DIGITAL OUT jack as well, except that HDMI 2ch	Connections
signal will be output from HDMI OUT jack, when connected device does not support Dolby Digital
and DTS.
• When “BD Audio Mode” is set to “Mix Audio Output”, the audio output from DIGITAL OUT will follow
the setting in the “HDMI Audio Out”. (When outputting Multi PCM from HDMI OUT, 2ch Downmix
PCM will be output from DIGITAL OUT.)
• Refer to pages 13 - 14 for more information of audio settings.

Speaker Setting
This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel		Playback
surround.
<Example of basic layout with 7.1ch surround system>
Front speaker (left)	Front speaker (right)	Function
Center speaker		Setup
Subwoofer
Surround speaker (left)	Surround speaker (right)
Surround back speaker (left)	Surround back speaker (right)	Others

Remote control operation	: Displaying the menu	: Move the cursor	: Confirm the setting	: Return to previous menu
buttons	Cancel the menu	(Up/Down/Left/Right)

34

ENGLISH