Marantz BD7004
Turning the unit to the standby mode, BD-V DVD-V DVD-VR Avchd, Direct Playback

ENGLISH

Playback

Introduction Connections Playback Function Setup Others

Disc playback

Direct Playback (BD/DVD-Video/AVCHD) : page 17

Playing Back a VR mode DVD-RW/-R : page 18

Playing Back an Audio CD or a Disc with

DivX®/MP3/Windows Media™ Audio/JPEG
File	: page 26
Kodak Picture CD	: page 28
SD Card playback
Reading the SD Memory Card	: page 28
Operations Using Disc Menu, Title Menu,
and Popup Menu	: page 18

NOTE

• may appear at the top-right on the screen when the operation is prohibited by the disc or this unit.

•During the playback of 2-layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a malfunction.

•The operation may vary when you play back with disc menu. Refer to the manual accompanying the disc for details.

AB C

<POWER ON/STANDBY>

About the button names in this explanation < > : Buttons on the main unit

[] : Buttons on the remote control

Button name only:

Buttons on the main unit and remote control

[POWER OFF]

[POWER ON] A

[U / V / Y / Z]

[ENTER]

C B

Turning the Power On

Press [POWER ON] or <POWER ON/STANDBY> to turn on the unit.

The power indicator turns off when the power is on.

Turning the unit to the standby mode

Press [POWER OFF] or <POWER ON/STANDBY> to turn the unit to the standby mode.

The power indicator lights red.

Note

•Power continues to be supplied to some of the circuitry even when the power is in the standby mode. When leaving home for long periods of time or when traveling, unplug the AC cord from the AC outlet.

Direct Playback

BD-V DVD-V DVD-VRAVCHD

1Turn on the power of this unit. (Refer to “Turning the Power On” on this page.)

2Turn on the display device and select the appropriate input on the device to which the unit is connected.

3Press A to open the disc tray.

4Place the disc on the disc tray with its label side facing up.

	Align the disc to the
	disc tray guide.
5	Press A to close the disc tray.
	It may take a while to load

the disc.

Some discs may start playback automatically.

6Press B to start playback. Menu screen may appear.

In this case, use [U / V / Y / Z] to select the desired item, then press [ENTER].

7Press C once to stop playback temporarily. Refer to “Resume Playback” on page 18.

To eject the disc:

Press A to open the disc tray, then remove the disc before turning the unit to the standby mode.

17

ENGLISH