Marantz BD7004 manual Connections Playback Function Setup Others

Page 5

ENGLISH

Introduction

Important

Use only discs marked with logos listed on page 4.

Power Supply

The main power supply is engaged when the main plug is plugged in a 120V, 60Hz AC outlet. To operate the unit, press

[POWER ON] or <POWER ON/STANDBY> to turn on the unit.

Noise or disturbance tends to occur particularly when using indoor antennas or 300/ohms feeder wires. We recommend using outdoor antennas and 75/ohms coaxial cables.

Note

For heat dispersal, do not install this equipment in a confined space such as a book case or similar unit.

Dew Warning

Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. Do not use the unit at least for 2 hours until its inside is dry.

Avoid the Hazards of Electrical Shock and Fire

Introduction

Warning

To avoid fire or electric shock, do not expose this unit to rain or moisture.

WARNING:

LIVE PARTS INSIDE.

DO NOT REMOVE ANY SCREWS.

Installation Location

For safety and optimum performance of this unit:

Do not stand the unit up vertically. Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV.

Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit. Avoid locations subject to strong vibration or strong magnetic fields.

Be sure to remove a disc and unplug the AC cord from the outlet before carrying the unit.

Non-use periods - Turn off the unit when it is not in use. Unplug the unit from the household AC outlet if it is not to be used for a long time. Unplug the unit during lightning storms.

Please read this user guide carefully before using the unit, and keep it for future reference.

Cautions on Installation

Noise or disturbance of the picture may be generated if this unit or any other electronic equipment using microprocessors is used near a tuner or TV.

If this happens, take the following steps:

Install this unit as far as possible from the tuner or TV.

Set the antenna wires from the tuner or TV away from this unit’s AC cord and input/output connection cords.

10 cm or more

Wall

Cautions on Handling

Cautions on using mobile phones.

Using a mobile phone near this unit may result in noise. If so, move the mobile phone away from this unit when it is in use.

Before turning the power operation button on.

Check once again that all connections are correct and that there are no problems with the connection cables. Always set the power operation button to the standby position before connecting and disconnecting connection cables.

Sufficiently ventilate the place of installation.

If the unit is left in a room full of the smoke from cigarettes, etc., for long periods of time, the surface of the optical pickup could get dirty, in which case it will not be able to read the signals properly.

Do not handle the AC cord with wet hands.

Do not pull on the AC cord when disconnecting it from AC wall outlet. Grasp it by the plug.

If, by accident, water is spilled on this unit, unplug the AC cord immediately and take the unit to our authorized service center for servicing.

Before Using

Pay attention to the following before using this unit:

Moving the unit.

To prevent short-circuits or damaged wires in the connection cables, always unplug the power supply cord and disconnect the connection cables between all other audio components when moving the unit.

Store the user guide in a safe place.

After reading the user guide, store it in a safe place as it could come in handy in the future.

Whenever <POWER ON/STANDBY> is in the STANDBY state, the unit is still connected to AC line voltage.

Please be sure to unplug the cord when you leave home for, say, a vacation.

Note that the illustrations in these instructions may differ from the actual unit for explanation purposes.

About Copyright

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

U. S. Patent No’s, 6,836,549; 6,381,747; 7,050,698; 6,516,132 and 5,583,936.

Connections Playback Function Setup Others

2

ENGLISH

Image 5
Contents BD7004 Laser Safety Safety PrecautionsFCC Information For US customers Product Copyrights / Droits d’auteur / Derechos de Autor Class Laser ProductContents Connections Playback Function Setup Others Supplied Accessories FeaturesCleaning Discs About DiscsPlayable Discs and Files OthersJpeg WMAAbout the Remote Control  Change the signal code of the unitChange the signal code of the remote control Introduction Connections Playback Function Setup OthersPart Names and Functions Front PanelRemote Control Introduction Connections Playback Function Setup OthersFront Panel Display Adjusting the Brightness of the DisplayDisplay Description Examples of Displays during OperationVideo OUT/COMPONENT Video OUT Others Connecting to a TVRCA This unitHdmi Output Mode and Actual Output Signals  Audio signals output from Hdmi OUTAudio Setting Disc type Audio recording Hdmi Audio Out setting FormatDisc type Audio recording format Digital Out setting  Audio signals output from Digital OUT CoaxialDigital Connection to an AV Amplifier with Built-in Decoder AudioNetwork Connection with LAN Signals are outputAV amplifier No supplied cables are used in this connectionAC 120V, 60 Hz AC cord Connecting the AC cordAC outlet Turning the Power On  Turning the unit to the standby modeBD-V DVD-V DVD-VR Avchd Direct PlaybackDVD-VR BD-V DVD-V AvchdMP3 WMA DVD-VBD-V DivXCD MP3 WMA Jpeg PIP Picture in Picture Bonusview SettingDivX Repeat PlaybackRandom Playback DVD-V DVD-VR DivX JpegZoom Clear Using Search Mode  Using H / GBD-V DVD-V  Marker searchMP3  Hdmi information  File name informationBD-V DVD-V DVD-VR CD Avchd DivX  BD-V Mix Audio Output BD-V DVD-V DVD-VR CD Avchd DivX MP3 WMA HD Audio Output PlaybackMP3 WMA Jpeg Adjusting the PictureWindows Media Audio/JPEG File BLU YELSubtitle list will appear MP3 / Windows Media AudioKodak Picture CD Inserting the SD Memory Card and playbackReading the SD Memory Card Mode Removing the SD Memory Card Setting the mediaConnections Enjoying BD-Live Discs with InternetIntroduction Connections Using the Setup MenuQuick CustomSetting items Options Playback Function Setup Others Language  Video Introduction ConnectionsHdmi Video Resolution Hdmi RGB SettingProgressive Mode Still Mode Audio BD Audio ModeWall Paper Hdmi Audio OutSpeaker Setting Digital Out SettingSetup FunctionChannel Level Menu Setting items Options DescriptionsSpeaker Configuration Proceed to a C RatingsOthers Setting items Options DescriptionRating Explanations Hdmi CEC PlaybackEnableEasy  IP Address SettingEnableCustom Network ConnectionNumber buttons Enter number  DNS Setting Proxy Setting Disable  BD-Live SettingNetwork Update Proxy PortInitialize Explanation of Terms Trademark InformationDTS BonusviewDTS-HD HdcpPicture-in-Picture PCM Pulse Code ModulationPrimary Audio Progressive sequential scanningIndex Problem Solution TroubleshootingLanguage Code Language CodeSetup SpecificationsIntroduction OthersE5KB0UD / 1VMN27573A 07/2009 541110333221M mzh-d