Marantz BD7004 manual
Audio, Wall Paper, BD Audio Mode, Hdmi Audio Out

ENGLISH

Function Setup

Introduction	Setting items	Options
	Wall Paper	Picture*
	Sets the picture to be displayed on	Blue
	the screen for stop mode or audio
		Black
	playback mode.
		Gray
	• Settings with (*) are the default.
	• Quick menu consists of the setting menus frequently used, and they are accompanied with
	mark.
Connections	• For “HDMI RGB Setting”, select “Enhanced” if the black-white contrast is not clear. The setting is
	effective only for HDMI RGB output.
	• Even if “HDMI Video Resolution” is set to “1080p24”, for the BD that is not recorded by 1080p24
	frame or for DVD, a video resolution supported by the disc and the display device will be output
	instead of 1080p24 frame.
	• An individual picture on the screen is called as “Frame” , which consists of two separate images
	called as “Field”. Some pictures may be blurred at the auto setting in “Still Mode” due to their
	data characteristics.
	• If the picture is not output properly to the display device because of the “HDMI Video
	Resolution” or “Component Output” setting, press and hold B on the front panel for more than
Playback	5 seconds. Both settings will be reset to the default automatically.
	• If “Component Output” is set to “480i”, “4:3 Squeeze Auto” and “4:3 Squeeze On” in “TV Aspect”
	are not available.
	• If HDMI is connected, for video resolution for the component output, you can only select video
	resolution that currently output from HDMI OUT or 480i.
	• If the video resolution for the component output and HDMI video resolution does not match, the
	video resolution for the component output will be switched to current HDMI output resolution.
Function	COMPONENT VIDEO OUT jacks may not output any signals depend on the disc material.
	gray and you cannot select the items.
	• If you play back copy-protected DVD-Video, 480p signal will be output from the COMPONENT
	VIDEO OUT jacks, when “Component Output” is set to “720p” or “1080i”.
	• The setting items which are not available with current situation of this unit will be displayed in
Setup	• Even if “HDMI Select” is set to “YCbCr”, if the display device does not support YCbCr, RGB will be
	output.
	• If “HDMI Video Resolution” is set to “Source Direct”, “1080p” or “1080p24”, you cannot set
	“Component Output”.
Others

Function Setup

Audio

Audio
BD Audio Mode	Mix Audio Output
HDMI Audio Out	HDMI Multi(Normal)
7.1ch Audio Out	Multi Channel
Down Sampling	Off
DRC	Auto

• For how to select the setting items and options, refer to “Custom” on page 30.

Setting items	Options
BD Audio Mode	Mix Audio Output*:
For BD, select whether to output	Output the secondary and interactive audio with
	primary audio if it is available.
the secondary and interactive
audio with primary audio if it is
available or only the primary	HD Audio Output:
audio. Refer to “Setting the BD	Output only the primary audio. Set this mode in order to
Audio Mode” on page 25.	output Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
	DTS or DTS-HD sound of BD through HDMI connection.
HDMI Audio Out	HDMI Multi(Normal)*:
Sets the audio format for the audio	The multi-channel audio signals are output from the
	HDMI OUT with a bitstream or PCM.
output from the HDMI OUT.
	HDMI Multi(LPCM):
	The multi-channel audio signals are output from the
	HDMI OUT with a PCM.
	• Refer to pages 34-36 for speaker setting options.
	HDMI 2ch:
	The audio signals are output from the HDMI OUT with a
	downmixed to 2ch PCM.
	Audio Mute:
	Mutes the HDMI audio signal, and set the signal format
	of the DIGITAL OUT.
	• Refer to the “Digital Out Setting” on page 34 for setting
	options.

•The default setting of the “BD Audio Mode” is “Mix Audio Output”. If you want to output only the high quality primary audio, set “BD Audio Mode” to “HD Audio Output”.

Remote control operation	: Displaying the menu	: Move the cursor	: Confirm the setting	: Return to previous menu
buttons	Cancel the menu	(Up/Down/Left/Right)

33

ENGLISH