Installation Requirements

Assemble the necessary tools and supplies before beginning the washer installation. The parts supplied are in the washer drum.

Tools needed for connecting the water inlet hoses

•Pliers (that open to 19/_6in. [39.5 mm])

•Flashlight (optional)

Tools needed for installation

•Open end wrench 17 mm and 13 mm

•Level

•Wood block (2" x 4" [5.8 x 10.2 cm])

•Ruler or measuring tape

Parts supplied

Pedestal

A pedestal may be purchased separately for this washer. This pedestal will add about 13 in. (33 cm) to the height of your unit for a total vertical height of approximately 51 in. (130 cm).

(El>

Beaded strapTransport bolt hole plug (4)

Parts listed are available from your local Sears store or Sears Service Center. For further information, please call 1-800-4-MY-HOME® (1-800-469-4663}.

Optional Pedestal

This pedestal (with storage drawer) is available in three colors:

White - Part Number 42842

Bisque - Part Number 42844

Graphite - Part Number 42846

To order,	call your local Sears	store. For further information,	i;!

please call 1-800-4-MY-HOME		® (1-800-469-4663).
Stack	Kit

If You Have

Laundry tub or standpipe taller than 96 in. (2.4 m)

Overhead sewer

You Will Need to Buy

Sump pump system (if not already available)

Standard 20 gal. (76 L), 30 in. (76.2 cm) tall drain tub or utility sink and sump pump (available from local plumbing suppliers)

Are you planning to stack your Kenmore HE3t washer and dryer? To do so, find the stack kit (8541503) in the drum of the matching Kenmore dryer.

Selecting the proper location for your washer improves performance and minimizes noise and possible washer "walk."

Your washer can be installed under a custom counter, or in a basement, laundry room, closet, or recessed area. (See "Drain

Floor	drain	Siphon break, Part Number 285834;
		additional	drain hose Part
		Number 8318155; and connector kit,
		Part Number 285835
Drain	hose too	4 ft drain	hose extension	kit, Part
short		Number	285863
Water	faucets	2 longer water fill hoses:
beyond reach of		6 ft (1.8 m) Part Number		76314,
fill hoses		10 ft (3.0 m) Part Number		350021

System.")

Companion appliance location requirements should also be considered. Proper installation is your responsibility.

You will need

•A water heater set to deliver 120°F (49°C) water to the washer.

•A grounded electrical outlet located within 5 ft (1.5 m) of where the power cord is attached to the back of the washer. (See "Electrical Requirements.")

•Hot and cold water faucets located within 4 ft (1.2 m) of the hot and cold water fill valves, and water pressure of 20-100 psi (137.9-689.6 kPa).

•A level floor with a maximum slope of 1 in. (2.5 cm) under entire washer. Installing the washer on carpeting is not recommended.

•A sturdy and solid floor to support the washer with a total weight (water and load) of 400 Ibs (180 kg).

Do not operate your washer in temperatures below 32°F (0°C).

Some water can remain in the washer and can cause damage in low temperatures.

110.4492, 110.4493, 110.4292 specifications

The Kenmore 110.4292, 110.4493, and 110.4492 washing machines represent a blend of performance and efficiency designed to meet the needs of modern households. These models are part of Kenmore's well-regarded lineup, noted for their reliability and user-friendly features.

Each model features a top-loading design that offers ease of use and accessibility, making laundry day less of a chore. The capacity of these machines typically accommodates larger loads, allowing users to wash more items at once, which can be a significant time-saver. The durable construction of these machines ensures they can withstand the rigors of frequent use.

One of the standout features across these models is the range of wash cycles available. From heavy-duty options for tough stains to delicate settings for more sensitive fabrics, these machines cater to a variety of washing needs. The inclusion of an auto-sensing feature regulates water levels based on load size, promoting water efficiency while ensuring optimal cleaning performance.

The Kenmore 110.4292, 110.4493, and 110.4492 are equipped with advanced technologies such as Agitator and Impeller designs which enhance cleaning efficacy. The agitator model incorporates a central post that moves clothes vigorously, helping to lift and separate fabrics for a thorough clean. On the other hand, the impeller variant works by using a low-profile disc that creates currents in the water, gently pushing the clothes for effective washing without the risk of fabric damage.

Energy efficiency is another highlight of these models, often featuring Energy Star certification, which signifies a commitment to reducing energy consumption. This not only contributes to lower utility bills but is also beneficial for the environment.

The models also include user-friendly controls that make it simple to select the desired settings. The clear interface allows consumers to easily navigate through options, while features such as delay wash and direct drive systems offer additional convenience by allowing for customizable and quieter operation.

In summary, the Kenmore 110.4292, 110.4493, and 110.4492 washing machines are equipped with practicality and innovative features aimed at enhancing the laundry experience. Their robust construction combined with efficient washing technologies and a user-friendly interface make them suitable choices for anyone looking for a reliable washing machine for home use.