10. Installation
Satellite
1.Select Satellite using the 
button.
2.Select the satellite the antenna is pointing to from the options
using the OK 
or 
button.
3.If the required satellite is not available in the list, select User
Define. When pop up appears, select Yes and press the OK 
button to view keyboard. Enter the name of the satellite and select Save. Press the OK 
button to complete.
**
LNB Frequency
1.Select LNB Frequency using the 
button.
2.Select one option among Universal, 9750, 10600, 5150, 11475 and User Define using the OK 
or 
button.
If the required value does not exist, select User Define and enter the LNB frequency directly.
Note: If you select Universal, the 22KHz Tone value is set to Disabled.
22KHz Tone
1.Select 22KHz Tone using the 
button.
2.Select Enable/Disable using the OK 
or 
button.
Enable Dual LNB is used or two antennas are connected to the 22KHz tone switch box.
Disable 22KHz is not in use.
DiSEqC Input
1.Select DiSEqC Input using the 
button.
2.Select one option among Disable, DiSEqC A~D and Tone Burst A, B using the OK 
or 
button.
LNB Voltage
1.Select LNB Voltage using the 
button.
2.Select one option from Standard and High using the OK 
or 
button.
Note: When LNB Voltage is set as High, a
GB 56