10. Installation
Symbol Rate
1.Select Symbol Rate using the 
button.
2.Enter the symbol rate from 2 to 45 Ms/s in
3.Enter the symbol rate from 10 to 30 Ms/s in
4.Enter the symbol rate from 10 to 31 Ms/s in
Transmission
1.Select Transmission using the 
button.
2.Select one option form 
or 
button.
FEC
1.Select FEC using the 
button.
2.Select one option among Auto, 1/2, 2/3, 3/4, 5/6 and 7/8 using the OK 
or 
button in
3.Select one option among Auto, 1/2, 2/3, 3/4, 3/5, 4/5, 5/6, 8/9 and 9/10 using the OK 
or 
button in
4.Select one option among Auto, 3/5, 2/3, 3/4, 5/6, 8/9 and 9/10 using the OK 
or 
button in
Modulation
1.Select Modulation using the 
button.
2.Select one option form QPSK and 8PSK using the OK 
or 
button.
Pilot
1.Select Pilot using the 
button.
2.Select On/Off using the OK 
or 
button.
Note: When Transmission is set to
Refer to the table below.
GB 64