10.2 SMATV Search
SMATV Search allows you to perform channel search regardless of the setting value in antenna setting.
1.Select SMATV Search using the 
button, and press the OK button.
2.Select Search Type using the 
button.
3.Select one option from Auto and Manual using the OK 
or
button.
1. SMATV Automatic Search
Start/End Frequency
1.Select Start/End Frequency using the 
button.
2.Enter the frequency using the
Note: Enter the frequency from 950 to 2150 MHz.
**
Symbol Rate
1.Select Symbol Rate using the 
button.
2.Select one option among 27500, 26000 and 22000 using the OK
or 
button. If the required value does not exist, select User Define and enter the symbol rate directly.
Note: You can enter up to four symbol rates.
Select Search and press the OK 
button.
GB 67