10. Installation
•Motor Type
1.Select Motor Type using the 
button.
2.Select one option from DiSEqC1.2 and USALS using the OK 
or 
button.
DiSEqC1.2 General motor antenna using DiSEqC1.2
USALS Motor antenna using USALS
Note: When Motor Type is set as DiSEqC 1.2, both My Longitude and My Latitude are set to Disabled.
•My Longitude
1.Select My Longitude using the 
button.
2.Enter my longitude value using the
3.Select from East/West using the OK 
or 
button.
4.Press the OK 
button to complete.
•My Latitude
1.Select My Latitude using the 
button.
2.Enter my latitude value using the
3.Select from North/South using the OK 
or 
button.
4.Press the OK 
button to complete.
GB 58