10. Installation
Installer Menu
You can set default setting and operation limit for motor antenna.
1.Select Installer Menu from Motor Antenna Setting and press the OK 
button.
2.To save the present location, change the Motor Limit to Enable.
**
Note: When Motor Limit is set to Enable, Limit Position and Set
Limits are set to Disabled.
•Motor Limit
You can set the maximum motor limit both East and West to prevent damage to the antenna.
1.Select Motor Limit using the 
button.
2.Select Enable/Disable using the OK 
or 
button.
Enable Motor limit is set. motor does not exceed the limit.
Disable Setting is released.
Note: When setting new motor limit, set to Disable.
•Limit Position
You can set the maximum motor limit both East and West to prevent damage to the antenna.
1.Select Limit Position using the 
button and press the OK 
button.
2.Select from East/West using the OK 
or 
button.
East Sets East limit.
West Sets West limit.
•Set Limit
1.Select Set Limit using the 
button and press the OK 
button.
2.Move the antenna to the Limit Position to set using the OK or 
button.
Note: When limit is set, Motor Limit is automatically set to Enable.
GB 62