FUNAI ELC320EM9 owner manual 5Manual Register, 5Antenna Confirmation, Strength

5Manual Register

The manual register function lets you add the channels that were not scanned by the auto channel scan due to the reception condition at the initial setup.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “CHANNEL”, then press [ENTER].

5Antenna Confirmation

DTV

This function lets you check the digital signal strength of each channel.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “CHANNEL”, then press [ENTER].

INTRODUCTION PREPARATION WATCHING

or

3Use [Cursor K/L] to select “Manual Register”, then press [ENTER].

or

3Use [Cursor K/L] to select “Antenna”, then press [ENTER].

TV OPTIONAL

			Channell
	Channell	or	Autoscan
			Channel List
or
	Autoscan		Manual Register
	Channel List		Antenna
	Manual Register

Antenna

	4 Use [the Number buttons] or [CH. K/L] to select the
	channel for which you want to check the digital signal
4 Use [the Number buttons] to enter the number of the
	strength.
channel you want to add, then press [ENTER].

SETTING TROUBLESHOOTING INFORMATION

11

Manuall Registeri

For analog channels, select a		Register
channel to register using number
keys.
For digital channels, you must
perform Autoscan function.
Ch Change	BACK
		Back

		11-1
Antenna
		Back
Now	70 Peak	80
or
CH	Ch Change
or

5Press [SETUP] to exit.

Note:

•If set up completes successfully, “Registered to the channel list” is displayed.

•If external input is used, it is not possible to register the channel and “Unavailable” will be displayed on the TV screen.

•By using [CH. K/L], you can select the memorized channels only.

•If the channel is set to analog channel or external input, you cannot confirm the antenna condition.

11

Antenna

Back

Indicator is available for digital broadcasting only.

CH Ch Change

5Press [SETUP] to exit.

19

EN