FUNAI F20LCTE-A Operations, Watching a TV Program, Setting the Sleep Timer, Closed Caption

OPERATIONS

WATCHING A TV PROGRAM

1Press POWER to turn on the TV.

2Select the desired channel with CH ▼or ▲.

3Adjust the volume to the desired listening level using VOL ▼or ▲.

4Adjust picture controls for a natural looking image. (See “PICTURE ADJUSTMENT”.)

SETTING THE SLEEP TIMER

The sleep timer function allows you to have the POWER automatically turn off

after a set time period.

1Press POWER to turn on the TV and press SLEEP

on the remote control . SLEEP 10 MINUTE

2You may change the sleep

time by pressing SLEEP on the remote control repeatedly. The timer can be set up to 90 minutes. Each time SLEEP is pressed the time increases by 10 minutes. (The timer display counts up and sleep timer will be displayed on the screen when you press SLEEP on the remote control).

Note: When you disconnect the unit from the AC outlet or when you have a power failure, the sleep time will be lost.

TO CANCEL THE SLEEP TIMER

Press SLEEP repeatedly until “SLEEP 0 MINUTE” is displayed.

CLOSED CAPTION

This TV can receive Caption and Text.

CLOSED CAPTION SELECTION

You may view specially labeled (cc) TV programs, movies, news and prerecorded tapes, etc. with either a dialogue caption or text display added to the program.

1Press MENU so that the set up menu appears on the TV screen.

2Press the CH ▼or ▲ to point to “CAPTION”.

3Press VOL ▼or ▲ to select the mode you wish.

4When done, press MENU to exit.

: Press VOL ▼or ▲.

- TV SET UP -		- TV SET UP -		- TV SET UP -
PICTURE		PICTURE		PICTURE
CHANNEL SET UP		CHANNEL SET UP		CHANNEL SET UP
V-CHIP SET UP		V-CHIP SET UP		V-CHIP SET UP
LANGUAGE	[ENGLISH]	LANGUAGE	[ENGLISH]	LANGUAGE	[ENGLISH]
CAPTION	[OFF]	CAPTION	[CAPTION1]	CAPTION	[CAPTION2]
TV SOUND	[MAIN]	TV SOUND	[MAIN]	TV SOUND	[MAIN]
BACK LIGHT	[BRIGHT]	BACK LIGHT	[BRIGHT]	BACK LIGHT	[BRIGHT]

- TV SET UP -		- TV SET UP -
PICTURE		PICTURE
CHANNEL SET UP		CHANNEL SET UP
V-CHIP SET UP		V-CHIP SET UP
LANGUAGE	[ENGLISH]	LANGUAGE	[ENGLISH]
CAPTION	[TEXT2]	CAPTION	[TEXT1]
TV SOUND	[MAIN]	TV SOUND	[MAIN]
BACK LIGHT	[BRIGHT]	BACK LIGHT	[BRIGHT]

CAPTION MODE

1)Closed Caption Characters can be displayed on the TV screen only when the received broadcast signal contains Caption Signals.

2)Paint-on mode: Displays input characters on the screen immediately.

Pop-on mode: Once characters are stored in memory, they are displayed all at once.

Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines).

Note: If [CAPTION1] or [CAPTION2] is selected but a Closed Caption signal is not included, characters will not be displayed.

TEXT MODE

1)Displays the text on the screen by scrolling (max. 7 lines).

2)If the received broadcast signal does not contain caption or text signals, no change will occur.

Notes:

•When your TV receives a special effects playback signal (i.e., Search, Slow and Still) from a VCR’s video output channel (CH3 or CH4), your TV may not display the correct caption or text.

•Captions and texts may not match the TV voice exactly.

•Interference may cause the closed caption system not to function properly.

•The caption or text characters will not be displayed while the menu display or functions display is shown.

5If you see this screen:

If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To clear screen, select [CAPTION1], [CAPTION2] or [OFF].

- 10 - EN