
Back Panel Description, continued
Digital Audio Outputs
Back Panel
Remote
Connections
33Optics Digital Output
The Showcase DVD is equipped with one EIAJ optics digital audio output via a TosLink connector.
34Coaxial Digital Output
The Showcase DVD is equipped with one S/PDIF coaxial digital audio output via an RCA connector.
35RS-232 Communication Port
The Showcase DVD is equipped with an
3612 VDC Out and In
| The 12 VDC out and in connections allows you to control the |
| operational and |
| gers, to easily coordinate allowing whole systems or parts of sys- |
| tems. |
| Output. The 12 VDC output sends a 12 Volt power on/off signal |
| to other Krell components via a 12 V cable, as well as to other |
| devices that incorporate a 12 V power on/off trigger input. |
| Input. The 12 VDC input receives 12 Volt power on/off signals |
| from other Krell components and devices that incorporate a 12 V |
| trigger. |
|
|
Notes | When the Showcase DVD is in the operational mode, 12 VDC output |
| provides 12 V of DC output. When the Showcase DVD is in the |
| mode or off, DC output is 0 V. |
| 12 VDC Out (12 V trigger) current is limited to 30 mA. |
| Consult the owner’s manual of each component used in a custom installa- |
| tion to take full advantage of the Showcase DVD’s remote capability. |
| 37 IR Select Switch |
| Use this switch to activate the front or Back Infrared Sensor (38). |
| Front. The switch in the up position indicates that the front |
| infrared sensor is active. |
| Rear. The switch in the down position indicates that the back |
| infrared sensor is active. |
16 | Krell Showcase DVD |