Krell Industries DVD Player manual Steps Q-Y. Connect the Cables

Page 71

HDMI Upgrade

Procedure, continued

Note

Remove the plastic tags from the supplied cables and wires, before continuing the installa- tion. Add the Ty-Wrap plastic tags to cables, if needed, to keep them neatly positioned inside the chassis.

IMPORTANT

To unplug a transformer wire, pull the female fast-on connector at the end of the wire. If you pull the wire itself, instead of the connector, the wire may detach from the connector.

Steps Q–Y. Connect the Cables

Q. Release the 22-pin, 10-inch flat cable (22) from J1603 (23) on the drive PCB (This cable is affixed to the main power supply PCB. Not illustrated).

R. Connect the 22-pin, 10-inch flat cable (22) to connector J29 (24) on the HDMI adapter PCB. Orient the contacts to face the front of the Showcase DVD.

S. Connect the supplied 22-pin, 2-inch flat cable (11), with the contacts facing up, from J1002 (4) on the progressive output PCB to connector J4 (12) on the HDMI adapter PCB. Reset the tabs to lock the socket on J1002 (see Figure 5).

T.Connect the supplied 6-pin JST cable (13) from connector J7 (14) on the HDMI adapter PCB to connector J3 (15) on the HDMI power PCB (see Figure 5).

U.Unplug the two white transformer wires (16) from the main power PCB (see Figure 5 inset) and connect them to connectors J1 (17) and J2 (18) on the HDMI power PCB (see Figure 5). Polarity is not an issue.

V.Connect the supplied 8-pin JST cable (19) from connector J12 (20) on the HDMI adapter PCB to connector J6 (21) on the front panel PCB (see Figure 5).

W.Connect the 22-pin, 4-inch flat cable (25) from connector J1603 (26), on the HDMI adapter PCB to connector J1603 (23) on the drive PCB. Orient the con- tacts from J1603 (26) to face the front of the Showcase DVD.

X. Connect the 22-pin, 7-inch, flat digital video cable (3) (previously disconnected in Step E) to connector J1506 (27) on the HDMI adapter PCB. Orient the contacts so that they are facing toward the back of the unit.

Y.Position jumper JMP2 on the faceplate board so that it is across pins 1-2 , the middle and right-hand pins as you face the front of the unit. (not illustrated)

Step Z. Replace the Top Cover Of the Showcase DVD

Z. Replace the top cover using the 12 T-15 Torx screws (set aside in Step B above).

The Showcase DVD is ready for operation with the HDMI Digital Video Ouput Stage installed.

Figure 5 Inset

2 White Transformer Wires,

Main Power PCB

162 white transformer wires connected to the main power

PCB

16

6Showcase DVD / HDMI Upgrade

Page 70 Page 72
Image 71
Page 70 Page 72
Contents Instructions for Use Owner’s Reference Information ContactContents Showcase DVD Front Panel IllustrationsIntroduction Input and Output Connections Definition of TermsHardware OperationVideo Technology Video Signal Options Building the Video PictureUnpacking AC Power Guidelines PlacementProgressive Scan Video Hdmi ConnectorQuick Start StepConfigure the Showcase DVD to Match Your Television Showcase DVD Front Panel Disc Functions PowerFront Panel Description Menu Access Setup Functions Hdmi Button Optional Back pauses automatically when you enter the menu. UseSetup Button or Key Enter to select the desired menu itemBattery Installation and Removal Remote Control DescriptionProgramming Functions Showcase DVD Back Panel Analog Audio Outputs Back Panel DescriptionInterlaced Video Outputs Digital Audio Outputs Back Panel Remote ConnectionsBack Infrared Sensor Hdmi ConnectionConnection Steps Using Balanced ConnectionsStand-by LED 3 on the front panel illuminates Connect the balanced 27 or single-ended 28 analog audioOutputs to your loudspeakers Output to your loudspeakersCompatible Discs Showcase DVD OperationTo Play a DVD or VCD Press the stop button or key 7 to end disc playback Status WindowTrack Forward and Track Back Buttons or Keys DVD and VCD FunctionsDVD and VCD Functions To Play An Audio CD Track Forward and Track Back Button or Key Following functions are available when you play an audio CDAudio CD Functions Program Key MP3 Disc FormatsSearch Forward and Search Back Button or Key To Play MP3 Discs MP3 Disc Functions Title Interpreting Temporary Feedback Field IconsInterpreting Temporary Feedback Field Icons Multiple-toolbar at the top of the screen Configure the OSD functions. See pagesAccess other toolbar icons and their functions. See Exit the setup menu by pressing the enter button or keyTo Access the Setup Menu Showcase DVD Setup MenuBar. The status window continues to be displayed Press the setup button or key 17. The setup menu appearsNavigation Conventions OSD Main Menu Personal Rich Natural Soft Animation Setting DescriptionDescription of the OSD menu functions follows On Screen Display OSD Menus Values rang from +3 very sharp to -3 softDisplays the setup menu in English, Spanish, or French Special Functions Category Example To Change TV Shape Exit the setup menu by pressing the setup button or key Toolbar Icon List Multiple-toolbar IconsMove backward on the disc, frame by frame ToolbarMultiple-Tool bar Icons Toolbar 46 for more information Title/Chapter Program How to WriteSpecial Operations For a DVD or VCDSpecial Operations Track Program for an Audio CD How to Create an A-B Loop for a DVD, VCD, or Audio CD Child Lock/Unlock Access Control Menu on ScreenList of Authorized Discs Rating is not active. The disc plays in full To Activate Deactivate Parental ControlTo Unauthorize a Disc To Change Country 4-digit Code Did You Forget the 4-digit Code? Warranty Return Authorization Procedure Showcase DVD Hdmi Operation for Showcase DVD Hdmi Upgrade Now Available For the Showcase DVD Showcase DVD Front Panel Hdmi Upgrade Hdmi Upgrade Procedure Inset Analog Output PCB Left Front Corner Steps J-M. Install the Hdmi Adapter PCB Hdmi power PCB Hdmi adapter Steps Q-Y. Connect the Cables Showcase DVD Interior With Hdmi Upgrade Completed Connections
Top Page Image Contents