Buttons
VCR Function Buttons
Number Buttons
(0 through 9 &loO)
Select any channel up to 99 by pressing hvo number buttons.
For a
DISPLAY
Shows VCR operating displays on the TV screen.
Displays the time counter.
Turns on
TV Function Buttons
INPUT
Switches behveen line input and TV channels (tuner). L appears for line input instead of channel in VCR’s display panel.
Line input refers to the signal coming from a component connected to the audio/video input jacks.
T.SEARCH (Time Search) Displays the time search menu on the TV screen.
SLOW r/r
Used for
TRACKING A/V
Lets you manually reduce the
streaks that may appear on the picture during play, slow, or pause.
May reduce stereo playback noise.
PROGNCR+
Displays the VCR MAIN MENU or
VCR PLUS men” on TV screen.
CLEAR
Resets time counter to 0:OO:OO when it is displayed.
Allows you to correct entries when setting the clock or programming VCR for a VCR Plus+ or timer recording.
SPEED (Tape Speed)
Selects a recording speed
(SP, LP, SLP).
EDIT
Signals two properly connected VCRS to begin copying a tape. see page 26.
Press the TV button to set remote to control a compatible TV. Some buttons may not work with the TV
OFF
Turns off TV when remote is set to control TV.
Used along with the TV button to turn a compatible TV on or off when the remote is programmed to control that TV. See page 12.
VOLUME A/V
Raises and lowers sound.
PREV. CH. (Previous Channel) Switches between two channels.
Select one channel and then select another. Press PREV CH to switch between the two channels.
CHANNEL A/V
Selects next higher or lower channel in the TV’s channel memory.
MUTE
Turns the TV sound on or off.
Number Buttons
(0 through 9 and 100)
Select any channel up to 99 by pressing two number buttons.
Select a channel over 99 by pressing the 100 button and then two number buttons for compatible TVs.
DISPLAY
Shows the status displays on the screen.
Removes menus or displays fvxn the screen.
CLEAR ,
Removes menus or status
displays from the screen.
11