Buttons
Component Buttons
Pressoneof the buttons to set the remote
VCR1
Turns on a compatible RCA VCR and sets remote to control
the VCR.
VCR2
Turns on a compatible RCA VCR and sets remote to control the VCR when it has been seh~p. see page 12.
VCR Function Buttons
PressVCR1 (VCR2) to set remote to control function buttons.
to operate that component
TV
Turns on a compatible RCA TV and sets the ret&e to control the TV.
Used with OFF to turn another brand of TV on or off when the rettiote is programmed to control that TV. See page 12.
the VCR to use the
OFF
Turns off VCR when remote is set to control the VCR.
NNCR
Switches the picture signal so that it either comes from the VCR or the TV channel. See page 9.
PLAY
Plays a tape.
REW (Rewind)
Rewinds the tape.
Searches the picture in reverse motion during playback.
FFWD (Fast Forward)
Fast forwards the tape when the VCR is stopped.
Searches the picture in forward motion during playback.
STOP
Stops the normal functions such
as record, playback, rewind, fast forward. and pause of the VCR.
REC/XPR
Starts VCR recording.
Used for express recording (XPR).
F.ADV/CS (Frame Advance/ Commercial Scan)
Lets you view one frame with each press of the button when tape is in PAUSE.
Skips short segments of tape during playback
PAUSE
Pauses action for viewing during playback.
Pauses recording to prevent recording of unwanted scenes.
PREY.CH. (Previous Channel) Switches between two channels.
Select one channel and then select another. Press PREV.CH. to switch between the two channels.
CHANNEL rlr
Selects next higher or lower channel in the VCR’s channel memory.
10