RCA VR663HF manual Setting a VCR Plus+ Recording, PAOGNCR+ to remove the menu from the TV screen

Recording While You’re Away (VCR Plus+ Recording)

The VCR Plus+ and timer program features let you program the VCR to record up to eight different programs within a one year period. Before using VCR Plus+ to record a program, make sure that:

*Cable box set up has been completed if you use a cable box.

*VCR Plus+ set up has been completed.

*The clock is set correctly.

. A tape with safety tab has been inserted with enough tape to record the programs. * The remote is set to control the VCR- using VCR1 (VCR2).

Setting a VCR Plus+ Recording

1.Press PROGNCR+ on the remote to display the VCR MAIN MENU on the TV screen.

2.Press 1 to display the VCR PLUS menu.

3.Press numbers on the remote to enter the PlusCode number for the program you want to record.

Press CLEAR to correct an entry.

4.Press PROGNCR+ to enter the program.

If the VCR does not recognize the PlusCode number,

UNRECOGNIZED NUMBER PLEASE RE-ENTER OR PRESS PROGRAM TO PROCEED appears on the TV screen. Check your number and enter it again.

5.Press 1,2, or 3 to select type of program.

1 ONE-TIME PROGRAM-single program.

2 DAILY PROGRAM -Monday through Friday.

3 WEEKLY PROGRAM - same program once a week.

A screen appears verifying the channel, time on, time off, and date of the recording.

6.Select a recording speed by pressing SPEED on the remote.

7.Press PROGNCR+ to enter your program. A reminder appears which will time out or you can press

PROGNCR+ to F&XII to the VCR PLUS menu.

PROGRAMS OVERLAP may appear on the screen if you entered hvo programs where the times overlap.

See page 23 to clear a pmgmm.

8.Repeat steps Z-6 for additional programs or press

PAOGNCR+ to remove the menu from the TV screen.

9, Turn off the VCR before recording time. TIMER should appear in the VCR’s display panel.

10If using a cable box, leave it turned on and hmed to the channel you want to record.

22

lln I