Pioneer DVR-433H-K, DVR-433H-S manual Enter the timer recording settings

Recording

2Select ‘New Input’ to set a new timer program, then press ENTER.

Timer Program Set
Manhattan Open Tennis
CH	Date	Start		Stop	Extend
Pr 10	SAT 26/3	18:00		21:00	30 min
					Store Program
Detailed Settings			Enter Details
Record To			HDD
Recording Mode			XP		Set Detailed
	Auto Replace Rec.		On
Genre			No Category		Set Title Name
Bilingual Recording			A/L		Cancel
HDD Recording Format			Video Mode On

3 Enter the timer recording settings.

Use the buttons to select a field; use the buttons to change the value.

•CH – Choose a channel (Pr 1–Pr 99, excluding skip channels), or one of the external inputs from which to record.

•Date – Choose a date up to one month in advance, or select a daily or weekly program.

•Start – Set the recording start time.

•Stop – Set the recording end time (maximum length of a timer recording is 24 hours).

4If you want to change the recording mode, recording destination, etc., select ‘Set Detailed’. In this area you can set:

Record to – Select HDD for hard disk recording or DVD for DVD recording. Select HDD for Auto Replace Recording (daily or weekly timer recording only).

Recording Mode – Select XP, SP, LP, EP, SLP or SEP, (See Setting the picture quality/recording time on page 39). If Manual Recording is on, then you can also select the LPCM or XP+ setting, or MN (press ENTER

then use the buttons to select the level).

Replace – Auto Replace Recording: automatically erases the previous daily or weekly recording when the next one is recorded.

Genre – Select a record genre (for HDD recording only).

Bilingual – Select which channel of a bilingual broadcast to record (necessary if recording to a Video mode DVD or to the HDD with the HDD Rec Mode set to Video Mode On).

HDD Recording Format – Select Video Mode On or Video Mode Off depending on whether you need high- speed copying to Video mode DVD capabillity or not.

5After entering all the timer recording information, highlight ‘Store Program’ and press

ENTER.

The timer recording list screen is displayed again. The timer program you just input appears in the list. The rightmost column shows various timer recording status messages:

05

•OK – Can be recorded.

•Time Over – Not enough space on the HDD (the recording won’t finish).

•Over 12h – Recording time of over 12 hours set (when recording to the HDD the recording will be split into two titles).

•Overlap – Two timer programs partially or completely overlap. The one starting earlier will take priority.

•Until ... (eg., Until 13/8) – For a regular recording, the last program that could be recorded is shown.

•Data Over –Can’t record because the disc management area of the disc is full.

•Cancel Once – A regular timer program is set to skip.

•Can’t Rec – Not possible to record for some reason.

•Title Over – Can’t record because there is already the maximum number of titles on the disc (HDD: 999; DVD: 99).

•Recording – The program is currently recording.

•Standby – The recorder is in timer recording standby.

•nothing displayed – Another timer recording or copying is in progress.

6To exit the timer recording screen, press HOME MENU.

Tip

•To enter a title name for the timer recording in advance, select Set Title Name and follow the on- screen display.

Note

•If you set a DVD timer recording but there is no recordable DVD disc loaded, or the disc loaded doesn’t have enough free space for the complete recording, Recovery is shown. In this case (unless you load a suitable disc before the recording actually starts), the recorder will use the HDD for recording. (The message Can’t Rec will appear if there are already 999 titles on the HDD or if there is not enough free space on the HDD for recording.)

•For a DVD timer recording, if Optimized Rec (see Optimized Rec on page 97) is set to On, the recorder will adjust the recording quality to try and fit the recording on the disc. If the recording will not fit onto the disc even on MN1 recording quality then the Recovery Recording feature will automatically make the recording to the HDD instead.

•If there is very little free space left on the HDD, an Auto Replace Recording may not complete successfully.

45

En