Pioneer DVR-433H-S Still Picture Field, Frame, Seamless Playback, Parental Lock Set Password

13The Initial Setup menu

Setting	Options	Explanation
Still Picture	Field	Produces a stable, generally shake-free image.
	Frame	Produces a sharper image, but more prone to shake than Field stills.
	Auto •	The recorder automatically selects Field or Frame type still, according
		to the material playing.
Seamless Playback	On	Playback is smooth, but with a trade-off against the accuracy of the
		edit points.
	Off •	You may notice momentary interruption at edited points during play-
		back of a VR mode Play List.
Parental Lock	Set Password	In order to change the parental lock level or change the country/area
		code, set the password using this option. From the following screen,
		enter a four-digit number that will be your password.
	Change Password	In order to change the password, first enter your existing password
		and then a new one from the following screen.
	Change Level	From the following screen, first enter your password and then set a
		parental lock level.
	Country/Area Code	From the following screen, first enter your password and then set a
		country/area code.

Only certain discs have parental lock and country code features. Check the disc packaging to see what features the disc has. If you forget your password you can reset it by resetting the recorder to its factory settings. See Resetting the recorder on page 111.

Angle Indicator	On •	A camera icon appears on-screen during multi-angle scenes on a
		DVD-Video disc.
	Off	Nothing is indicated on-screen when a multi-angle scene is showing.
Options
On-Screen Display	On •	The recorder displays operation displays (Stop, Play, etc.) on-screen.
	Off	Switches off the on-screen operation displays.
Front Panel Display	On •	The time is shown in the front panel display when the recorder is in
		standby.
	Off	The front panel display is switched off in standby (although it still lights
		dimly when setting a timer recording).
Remote Control Mode	Recorder 1–3	If you are using more than one recorder in the same room, set them to
	(default: Recorder 1)	different IDs. This setting sets the recorder ID; to change the remote
		controller ID, press and hold RETURN then press 1, 2 or 3 to set. The
		remote will only control a recorder with the same ID.
AV. Link	This Recorder Only •	Signals received through the AV input when the recorder is in standby
		are not passed through to the AV output.
	Pass Through	Signals received when in standby are passed though to the output for
		connected devices. (Note that during EPG data download, the EPG
		data is not passed through.)

When set to Pass Through, make sure to set Power Save (page 92) to Off.

98

En