Pioneer DVR-433H-K, DVR-433H-S manual Initial Setup menu

The Initial Setup menu 13

Setting	Options	Explanation
Tuner Settings
Auto Channel Setting	Auto Scan	Select your country and then wait for the recorder to auto tune into
		channels in your area. After auto scan has finished, the channel map-
		ping screen appears showing which channels have been assigned to
		which program numbers. You can skip unwanted channels using the
		Manual Channel Setting option below.
		Press HOME MENU to exit the channel mapping screen.
	Download from TV	If your TV supports this feature you can download all the channels that
		your TV is tuned to via the SCART input. Select your country and then
		wait for the download to complete. After the download is complete, the
		channel mapping screen appears, as above.
		See also the operating instructions that came with your TV for more
		information.
Manual CH Setting	Next Screen	Proceed to the next screen if you need to adjust any of the settings
		made by auto tuning. Select your country, then proceed to the manual
		channel setting screen:
		• Change channel presets using the CHANNEL +/– buttons.
		• To skip the displayed channel (because there is no station assigned
		to that channel), change the Skip setting to On.
		• Set the CH SYSTEM setting to match the channel system of your
		country or region.
		• Set the CHANNEL setting to the channel you want to assign to the
		current channel preset.
		• To manually fine tune the channel, change the AFT setting to Off
		then adjust the Level setting.
		• The Name field allows you to input a name of up to five characters
		for the current channel preset.
		• If the currently selected channel is scrambled requiring a decoder
		connected to the AV2/AUTO START REC (INPUT 1/DECODER), set
		the Decoder setting to On.
Channel Swapping	Next Screen	Proceed to the next screen to swap channel assignments of different
		presets so that you can group together presets that naturally go
		together. Select two presets to swap then press ENTER.
Set VIDEO Plus+ CH	Next Screen	Proceed to the next screen to assign channel numbers to the guide
		channels as necessary. Look in your TV guide to see which channel
		numbers should be assigned to which guide channels. Press ENTER
		when your done to leave this screen.
Video In/Out Settings
Input Colour System	Next Screen	Proceed to the next screen to set the input colour system for each
		channel preset. Use the CHANNEL +/– buttons to change the preset.
		On the default Auto setting the recorder can generally correctly detect
		whether the input signal is PAL, SECAM, 3.58 NTSC or PAL-60, but in
		some cases you may have to set it manually if the picture is displayed
		incorrectly.

See also About the input colour system on page 99 for more information on this setting.

93

En