Pioneer DVR-433H-K, DVR-433H-S manual Mpeg PCM

The Initial Setup menu 13

Setting	Options	Explanation
Bilingual Recording	A/L •	Record the left (A) channel of a bilingual source when recording to
		HDD with HDD Recording Format set to Video Mode ON, to DVD in
		Video mode or in LPCM mode, from an external source.
	B/R	As above, but for right (B) channel recording.

When recording bilingual audio to DVD in VR mode (except in LPCM mode), or to HDD with HDD Recording Format set to Video Mode Off (except in LPCM mode), both audio channels are recorded and you can switch to the one you want on playback.

DV Input	Stereo 1 •	Select to use the ‘live’ audio track (recorded during the video shoot)
		from a camcorder that supports two stereo audio tracks.
	Stereo 2	Select to use the overdubbed audio track from a camcorder that sup-
		ports two stereo audio tracks.
	Mix	Select one of the three settings to use a mix of the two stereo audio
		tracks.
Input Level (L1–L3)	-6dB – +6dB	Adjust the input level separately for each of the external inputs from
	(default: 0 dB)	–6dB to +6dB in steps of 3dB.
Audio Out Settings
Digital Out	On •	Activates the digital audio output.
	Off	Deactivates the digital audio output.

When set to Off, all the following Audio Out settings are grayed out.

Dolby Digital Out	Dolby Digital •		Output a Dolby Digital signal when a Dolby Digital source is being
			played.
	Dolby Digital PCM		Convert Dolby Digital sources to Linear PCM output. Use if your con-
			nected equipment doesn’t have a Dolby Digital decoder.
DTS Out	On •		Output a DTS signal when a DTS source is being played.
	Off		Switch off the digital output when a DTS source is being played. Use
			when your connected equipment doesn’t have a DTS decoder. In this
			case, use the analog audio outputs.
96 kHz PCM Out	96 kHz	48 kHz •	Convert 96 kHz digital audio sources to 48 kHz output. Use if your con-
			nected equipment doesn’t support 96 kHz sampling rate.
	96 kHz		Output 96 kHz digital audio when a 96 kHz source is being played.
MPEG Out	MPEG		Output an MPEG audio signal when a source using MPEG audio is
			being played.
	MPEG	PCM •	Convert sources with MPEG audio to Linear PCM output. Use if your
			connected equipment doesn’t have an MPEG audio decoder.

95

En