Pioneer DVR-433H-K, DVR-433H-S Disc Setup menu Chapter, Basic settings, Initialize settings

Space

The Disc Setup menu 11

Chapter 11

The Disc Setup menu

Introduction

From the Disc Setup menu you can name discs, lock the contents to prevent accidental recording and erasure, initialize and finalize discs. The Disc Setup menu is accessed from the Home menu:

•Press HOME MENU and select ‘Disc Setup’.

Basic settings

Input Disc Name

VR mode Video mode

When you initialize a disc for recording, the recorder automatically assigns a name for the disc ranging from DISC 1 to DISC 99. You can use the Input Disc Name

function1 to change the default disc name to something more descriptive. This name appears when you load the disc and when you display disc information on-screen.

1Select ‘Input Disc Name’ from the Basic options, then ‘Next Screen’.

Disc Setup
Basic	Input Disc Name	Next Screen
Initialize	Lock Disc
Finalize
Optimize HDD

2Input a name for the disc up to 64 characters long for a VR mode disc, or 40 for a Video mode disc.

• Use the	buttons to change the cursor
position.

•Select CAPS or small to change to upper or lower- case, or use the CASE SELECTION buttons (

).

•You can also use the CLEAR button to delete characters directly (press and hold for two seconds to delete the whole name).

•For discs formatted on a different DVD recorder, you will see only a limited character set.

Lock Disc

VR mode

• Default setting: Off

Disc Setup

Basic	Input Disc Name	On
Initialize	Lock Disc	Off

Finalize

Optimize HDD

Set to On to prevent accidental recording, editing or

erasing of the disc loaded2. If you need to unlock the disc to make edits, select Off.

Important

•A locked disc can still be initialized (which will completely erase the disc).

Input Disc Name

D I S C 7

CAPS small

OK

A B C D E F G H I J K L M . , ? ! N O P Q R S T U V W X Y Z ( ) : ;

A A A A A A Æ ç E E E E I I I I # D N O O O O O ø U U U U Y ß $ %

0 1 2 3 4 5 6 7 8 9 < = > _ &
	+ – / @ [ ¥ ] ˆ ⎟ x ± { } ~								¡
c £					a			_
			\ § ¨ © –			<< ¬ – ® ˚
2 3		´	∝ ¶ · ¸	1	o	1	1	3
					–	<< /4	/2	/4 ¿ `

Clear

Initialize settings

DVD-R DVD-RW

You can initialize a recordable DVD disc for either VR mode or Video mode recording.

The first time you load a new DVD-RW disc, it will be automatically initialized for recording according to the DVD-RW Auto Init. setting in the Initial Setup menu (see page 97).

• Use the and ENTER to select characters.

Note

1.You cannot input a name for a disc if the TV line system of the disc is different to the current setting of the recorder. See Additional information about the TV system settings on page 99 for how to change the recorder’s setting.

2.You cannot change the lock setting for a disc if the TV line system of the disc is different to the current setting of the recorder. See Additional information about the TV system settings on page 99 for how to change the recorder’s setting.

87

En