Pioneer PRO-1000HDI manual Connection to a personal computer, When connecting to Output INPUT1

Page 15

Installation and Connections

Connection to a personal computer

Connection method differs depending on the computer type. When connecting, please thoroughly read the computer’s instruction manual.

Before making connections, be sure to make sure that the personal computer’s power and this unit’s main power is off.

For the PC input signals and screen sizes that this unit is compatible with, please refer to supplement 1 (pages 39 to 40).

Connection of separate SYNC analog RGB

source

Make separate SYNC connections for a personal computer that has RGB output separated into 5 output signals: green, blue, red, horizontal synchronization signal, and vertical synchronization signal.

When connecting to INPUT2

(ON SYNC)		INPUT2	(H/V SYNC)
G	B	R	HD	VD

75Ω Ô2.2kΩ

When connecting to INPUT1

				INPUT1	OUTPUT
ANALOG RGB					OUTPUT
ANALOG RGB				(ANALOG RGB)

Connect the cable corresponding to the shape of the input terminal on this unit and the personal computer’s output terminal.

Secure by tightening the terminal screws on both units.

After connecting, on-screen setup is necessary. Please see pages 18 and 19.

Note

Depending on the type of computer model being connected, a conversion connector or adapter etc. provided with the computer or sold separately may be necessary.

For details, please read your PC’s instruction manual or consult the maker or nearest dealer of your computer.

Installation and Connections

When using INPUT2, set the impedance selector switch to match the output impedance of the connected computer’s synchronization signal.

When the output impedance of the computer’s synchronization signal is below 75 Ω , set this switch to the 75 Ω position.

On-screen setup is necessary after connection. Please see pages 18 and 19.

When connecting to OUTPUT (INPUT1)

		INPUT1	OUTPUT
ANALOG RGB			OUTPUT
ANALOG RGB		(ANALOG RGB)

To an external monitor

With this unit, it is possible to output the video signal to an external monitor or other component from the OUTPUT (INPUT1) terminal.

Note

A video signal will not be output from the OUTPUT (INPUT1) terminal when the main power of this unit is off or in standby.

11

PRO-1000HDI / PRO-800HDI

Image 15

Contents PRO-1000HDIPRO-800HDI Wash hands after handling Safety PrecautionsNEC Section Safety PrecautionsIii Contents Screen Displays How to Use This ManualBefore Proceeding About operations in this manualAA R6 batteries x Remote control unitCleaning cloth for wiping front panel ÷ WarrantyOperation panel on the main unit Part Names and FunctionsMain Unit Main unitRemote Control Unit Inserting the batteries Remote control unitWhen handling the remote control unit Connection Panel Operating range of the remote control unitAudio Output Stereo mini jack $ Main power switchIllustration depicts Part Names and Functions Audio Input Stereo mini jackInstallation of the Unit Installation and ConnectionsConnection to AV components About the Input Connectors on thisUnit Connection to INPUT1 and INPUT2Connection of composite Sync analog RGB Source Connection of G on Sync analog RGB sourceTo an external monitor When connecting to Output INPUT1Connection to a personal computer Connection of separate Sync analog RGB Source75Ω Ô2.kΩ2 AV component Connection to INPUT3Connection to INPUT4 Connection to INPUT5Making connections to the audio inputs on this unit Connecting the speakersAbout DTV Set Top Box Connection Audio ConnectionsINPUT3 Audio connection for component connected toControl Cord Connection Power Cord ConnectionIllustration depicts PRO-1000HDImodel How to Route CablesTo attach the speed clamps to the main unit To remove speed clampsWhen inputting a computer signal Setting Up the SystemSetting the Screen Mode/Input Signal Format Setup after Connection INPUT1Setup of Clamp Position Clamp Position setupSetup after Connection INPUT5 Press 5/∞ to select Video SignalPress SET to select the desired Video Signal setting Press 5/∞ to select Audio Select Press 5/∞ to select Signal RangePress SET to select the desired Signal Range setting Press SET to select the desired Audio Select settingBefore you begin, make sure you have Press STANDBY/ON to put this unit in the operation modeOperations Selecting an Input SourceTo adjust the volume To confirm display settingsTo mute the sound Moving the screen position upward or downward Screen Size SelectionChanging the screen size Automatic screen sizePartial Image Enlargement Area 3 display rangeArea 1 display range Area 2 display range All other cases Automatic Power OFFTo return to operating mode When the setup is finished, press Menu to exit Menu screenDisplay Panel Adjustments Adjusting the Picture QualityTo reset Picture mode settings to the default Adjusting the Image Position and Clock Automatic Adjustment Screen mode adjustment itemsPress 2/3 to select Screen Use 5/∞ for the adjustments of V.POSITION To reset Screen mode settings to the defaultWhen video signal input is selected Press 2/3 to carry out the adjustmentPress Menu to return to the normal display screen Other OperationsRewriting the Input Display Press SET to select Input LabelChanging the Color Temperature Reducing Video Noise Digital NROther Press SET to set the mode to Motion Setting the PureCinema modeViewing a Fast Moving Picture 3D Y/C Mode Press 5/∞ to select 3D Y/C ModeViewing in a Bright Location Power Control FunctionPress SET to select Input 1 or Input Factory default setting is OFF. Each time SET isAudio Output Audio OUT Press 5/∞ to select Auto FunctionAdditional Information CleaningTroubleshooting About the self diagnosis modeGeneral problems Problems commonly mistaken as breakdownProblem Possible Solution Panel sticking and after-image lag STANDBY/ON indicatorAbout the plasma panel’s Protection functionGeneral PRO-800HDI SpecificationsAccessories General PRO-1000HDIRefresh rate Screen size Dot x line Remarks PC signal compatibilty table INPUT1, INPUT2Supplement 1 -1/2 PRO-1000HDI Not availableRefresh rate Screen size Dot x line Video signal compatibilty table INPUT1, INPUT2 Digital signal compatibilty table INPUT5Supplement Aspect ratio Video signalComponent video signal Explanation of TermsAdditional Information TSZZF/03I00000