Pioneer PRO-1000HDI About DTV Set Top Box Connection, Audio Connections, Connecting the speakers

Installation and Connections

About DTV Set Top Box Connection

To ensure proper connection, please carefully read the instruction manual supplied with the DTV set top box.

The set top box output signals that this display is compatible with are as follows.

Video	Video signal	Video	Terminals where connection is possible
signal type		signal format	INPUT1 INPUT2 INPUT3 INPUT4 INPUT5
HDTV	1080i	Component
	720p	RGB
		Digital
	1080p	Component
		RGB
SDTV	480i	Composite
		S Video
		Component
		RGB
	480p	Component
		RGB
		Digital

Audio Connections

Before making connections, be sure to check that the audio component’s power and the unit’s main power is off.

Connecting the speakers

This unit is equipped with a 2W+2W internal amplifier. If speakers are to be connected to the unit, following the accompanying connection instructions.

Twist exposed wire strands together.

Push tab to the open position, and insert the wire. Then, close tab firmly to secure the wire in place.

Note

When making speaker connections, be sure to match the polarities (+ and –) of the speaker terminals on this unit and the corresponding terminals on the speakers. If the polarity is reversed, the sound will be unnatural and lack bass.

Making connections to the audio inputs on this unit

This unit features three audio inputs and one audio output. The following chart shows the video inputs and the corresponding audio input terminals.

Video	Audio input	Sound output
input	terminal
INPUT1	Stereo mini jack	Sound of the selected video
INPUT2	(L/R)	input is output from the
INPUT3	Pin jacks (L/R)	• SPEAKER terminals
INPUT4	Pin jacks (L/R)	• Stereo mini jack (L/R).
INPUT5	Pin jacks (L/R)

14

PRO-1000HDI / PRO-800HDI