Pioneer PRO-1000HDI manual How to Route Cables, To attach the speed clamps to the main unit

Page 21

Installation and Connections

How to Route Cables

Speed clamps and bead bands are included with this unit for bunching cables together. Once components are connected, follow the following steps to route cables.

1

* As viewed from the rear of the display.

2

Installation and Connections

1Organize cables together using the provided speed clamps.

Insert 1 into an appropriate hole on the rear of the unit, then snap 2 into the back of 1 to fix the clamp.

Speed clamps are designed to be difficult to undo once in place. Please attach carefully.

To attach the speed clamps to the main unit

Connect the speed clamps using the 4 holes marked with • (Black dot) below, depending on the situation.

2Bunch separated cables together and secure them with the provided bead bands.

Note

Cables can be routed to the right or left.

Illustration depicts PRO-1000HDImodel.

To remove speed clamps

Using pliers, twist the clamp 90° and pull it outward. In some cases the clamp may have deteriorated over time and may get damaged when removed.

17

PRO-1000HDI / PRO-800HDI

Image 21

Contents PRO-1000HDIPRO-800HDI Wash hands after handling Safety PrecautionsNEC Section Safety PrecautionsIii Contents Before Proceeding How to Use This ManualAbout operations in this manual Screen DisplaysCleaning cloth for wiping front panel Remote control unit÷ Warranty AA R6 batteries xMain Unit Part Names and FunctionsMain unit Operation panel on the main unitRemote Control Unit Inserting the batteries Remote control unitWhen handling the remote control unit Connection Panel Operating range of the remote control unitIllustration depicts $ Main power switchPart Names and Functions Audio Input Stereo mini jack Audio Output Stereo mini jackInstallation of the Unit Installation and ConnectionsUnit About the Input Connectors on thisConnection to INPUT1 and INPUT2 Connection to AV componentsConnection of composite Sync analog RGB Source Connection of G on Sync analog RGB sourceConnection to a personal computer When connecting to Output INPUT1Connection of separate Sync analog RGB Source To an external monitor75Ω Ô2.kΩ2 Connection to INPUT4 Connection to INPUT3Connection to INPUT5 AV componentAbout DTV Set Top Box Connection Connecting the speakersAudio Connections Making connections to the audio inputs on this unitINPUT3 Audio connection for component connected toControl Cord Connection Power Cord ConnectionTo attach the speed clamps to the main unit How to Route CablesTo remove speed clamps Illustration depicts PRO-1000HDImodelSetting the Screen Mode/Input Signal Format Setting Up the SystemSetup after Connection INPUT1 When inputting a computer signalSetup of Clamp Position Clamp Position setupSetup after Connection INPUT5 Press 5/∞ to select Video SignalPress SET to select the desired Video Signal setting Press SET to select the desired Signal Range setting Press 5/∞ to select Signal RangePress SET to select the desired Audio Select setting Press 5/∞ to select Audio SelectOperations Press STANDBY/ON to put this unit in the operation modeSelecting an Input Source Before you begin, make sure you haveTo adjust the volume To confirm display settingsTo mute the sound Changing the screen size Screen Size SelectionAutomatic screen size Moving the screen position upward or downwardPartial Image Enlargement Area 3 display rangeArea 1 display range Area 2 display range To return to operating mode Automatic Power OFFWhen the setup is finished, press Menu to exit Menu screen All other casesDisplay Panel Adjustments Adjusting the Picture QualityTo reset Picture mode settings to the default Adjusting the Image Position and Clock Automatic Adjustment Screen mode adjustment itemsPress 2/3 to select Screen When video signal input is selected To reset Screen mode settings to the defaultPress 2/3 to carry out the adjustment Use 5/∞ for the adjustments of V.POSITIONRewriting the Input Display Other OperationsPress SET to select Input Label Press Menu to return to the normal display screenChanging the Color Temperature Reducing Video Noise Digital NROther Viewing a Fast Moving Picture 3D Y/C Mode Setting the PureCinema modePress 5/∞ to select 3D Y/C Mode Press SET to set the mode to MotionViewing in a Bright Location Power Control FunctionAudio Output Audio OUT Factory default setting is OFF. Each time SET isPress 5/∞ to select Auto Function Press SET to select Input 1 or InputTroubleshooting CleaningAbout the self diagnosis mode Additional InformationGeneral problems Problems commonly mistaken as breakdownProblem Possible Solution About the plasma panel’s STANDBY/ON indicatorProtection function Panel sticking and after-image lagAccessories SpecificationsGeneral PRO-1000HDI General PRO-800HDISupplement 1 -1/2 PRO-1000HDI PC signal compatibilty table INPUT1, INPUT2Not available Refresh rate Screen size Dot x line RemarksRefresh rate Screen size Dot x line Video signal compatibilty table INPUT1, INPUT2 Digital signal compatibilty table INPUT5Supplement Component video signal Video signalExplanation of Terms Aspect ratioAdditional Information TSZZF/03I00000