Pioneer PRO-1000HDI manual Explanation of Terms, Aspect ratio, Jack S Video jack, Video signal

Page 46

Additional Information

Supplement 4

Signal assignment of INPUT 1 (Mini D-sub 15 pin socket connector)

	5	1
	10		6
	15	11
Pin No.	Input		Output
1	R or CR/PR		+
2	G or Y		+
3	B or CB/PB		+
4	NC (No connection)		+
5	GND		+
6	GND		+
7	GND		+
8	GND		+
9	DDC + 5V		NC (No connection)
10	GND		+
11	NC (No connection)		+
12	DDC SDA		NC (No connection)
13	HD or H/V SYNC		+
14	VD		+
15	DDC SCL		NC (No connection)

Explanation of Terms

Aspect ratio

The TV screen’s width to height ratio is referred to as its aspect ratio. The aspect ratio on standard TVs is 4:3 and on wide TVs or High Definition TVs it is 16:9.

S jack (S VIDEO jack)

This jack separates and transmits the video signal as two signals; the luminance (Y) signal and the color(C) signal. Because of this, picture reproduction is superior to that obtained at the composite input/output jacks.

S-video signal

The video signal is composed of two signals; the chroma signal (color signal) which reproduces color and the luminance signal which reproduces light and darkness. With standard video components, these two signals are combined into one and are handled as a video signal referred to as the “composite signal”. The S-video signal, however, is a signal that handles these two signals separately. Because they are not combined as in the composite video signal, the high quality of both signals can be retained.

Component video signal

General term for video signal format composed of the Y.CB.CR, Y.PB.PR and Y.B-Y.R-Y luminance signal + color signal.

The component video signal is sometimes simply called the “color difference signal”.

G ON SYNC

This indicates a video signal in the form of a synchronization signal added to the G (GREEN) signal of the R.G.B signal.

VGA

VGA is short for “Video Graphics Array”.

Generally this indicates a 640 dot x 480 line resolution.

XGA

General term for “eXtended Graphics Array”.

Generally this indicates a 1024 dot x 768 line resolution.

42

PRO-1000HDI / PRO-800HDI

Image 46

Contents PRO-1000HDIPRO-800HDI Safety Precautions Wash hands after handlingSafety Precautions NEC SectionIii Contents About operations in this manual How to Use This ManualBefore Proceeding Screen Displays÷ Warranty Remote control unitCleaning cloth for wiping front panel AA R6 batteries xMain unit Part Names and FunctionsMain Unit Operation panel on the main unitInserting the batteries Remote control unit Remote Control UnitWhen handling the remote control unit Operating range of the remote control unit Connection PanelPart Names and Functions Audio Input Stereo mini jack $ Main power switchIllustration depicts Audio Output Stereo mini jackInstallation and Connections Installation of the UnitConnection to INPUT1 and INPUT2 About the Input Connectors on thisUnit Connection to AV componentsConnection of G on Sync analog RGB source Connection of composite Sync analog RGB SourceConnection of separate Sync analog RGB Source When connecting to Output INPUT1Connection to a personal computer To an external monitor75Ω Ô2.kΩ2 Connection to INPUT5 Connection to INPUT3Connection to INPUT4 AV componentAudio Connections Connecting the speakersAbout DTV Set Top Box Connection Making connections to the audio inputs on this unitAudio connection for component connected to INPUT3Power Cord Connection Control Cord ConnectionTo remove speed clamps How to Route CablesTo attach the speed clamps to the main unit Illustration depicts PRO-1000HDImodelSetup after Connection INPUT1 Setting Up the SystemSetting the Screen Mode/Input Signal Format When inputting a computer signalClamp Position setup Setup of Clamp PositionPress 5/∞ to select Video Signal Setup after Connection INPUT5Press SET to select the desired Video Signal setting Press SET to select the desired Audio Select setting Press 5/∞ to select Signal RangePress SET to select the desired Signal Range setting Press 5/∞ to select Audio SelectSelecting an Input Source Press STANDBY/ON to put this unit in the operation modeOperations Before you begin, make sure you haveTo confirm display settings To adjust the volumeTo mute the sound Automatic screen size Screen Size SelectionChanging the screen size Moving the screen position upward or downwardArea 3 display range Partial Image EnlargementArea 1 display range Area 2 display range When the setup is finished, press Menu to exit Menu screen Automatic Power OFFTo return to operating mode All other casesAdjusting the Picture Quality Display Panel AdjustmentsTo reset Picture mode settings to the default Screen mode adjustment items Adjusting the Image Position and Clock Automatic AdjustmentPress 2/3 to select Screen Press 2/3 to carry out the adjustment To reset Screen mode settings to the defaultWhen video signal input is selected Use 5/∞ for the adjustments of V.POSITIONPress SET to select Input Label Other OperationsRewriting the Input Display Press Menu to return to the normal display screenReducing Video Noise Digital NR Changing the Color TemperatureOther Press 5/∞ to select 3D Y/C Mode Setting the PureCinema modeViewing a Fast Moving Picture 3D Y/C Mode Press SET to set the mode to MotionPower Control Function Viewing in a Bright LocationPress 5/∞ to select Auto Function Factory default setting is OFF. Each time SET isAudio Output Audio OUT Press SET to select Input 1 or InputAbout the self diagnosis mode CleaningTroubleshooting Additional InformationProblems commonly mistaken as breakdown General problemsProblem Possible Solution Protection function STANDBY/ON indicatorAbout the plasma panel’s Panel sticking and after-image lagGeneral PRO-1000HDI SpecificationsAccessories General PRO-800HDINot available PC signal compatibilty table INPUT1, INPUT2Supplement 1 -1/2 PRO-1000HDI Refresh rate Screen size Dot x line RemarksRefresh rate Screen size Dot x line Digital signal compatibilty table INPUT5 Video signal compatibilty table INPUT1, INPUT2Supplement Explanation of Terms Video signalComponent video signal Aspect ratioAdditional Information TSZZF/03I00000