Disney DVD2050-C manual Remote Control, Battery Installation, Battery Precautions

REMOTE CONTROL

BATTERY INSTALLATION

1	Screw	Screw
	Adult	Child
	Remote	Remote

2
+	+
– +–	– +–
Adult	Child
Remote	Remote

3
Adult	Child
Remote	Remote

Open the battery compartment cover by removing the screw, then sliding the battery cover out.

Install two (2) “AA” batteries (not	Replace the battery compartment
included) into each remote, paying	cover and screw.
attention to the polarity diagram in the
battery compartment.

BATTERY PRECAUTIONS

Follow these precautions when using batteries in this device:

1.Use only the size and type of batteries specified.

2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.

3.Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batteries with fresh ones.

4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

5.Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)

EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER

45 4520ft

NOTES:

•When there is an obstacle between the DVD and the transmitter, the transmitter may not operate.

•When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the REMOTE SENSOR of the DVD, the remote operation may be unstable.

7