|
|
| Section 5 |
DriveRack | ® |
| |
|
| In Use |
|
With three pages per Bandpass filter set, it should be noted that there will be nine total pages in this function; these pages can either be accessed by continuing to press NEXT PAGE or by pressing the next Output Channel button. Since in a 2x5 Bandpass the first two and the next two outputs are “linked” together, both outputs 1 and 2 will be controlled together in the first three pages of the Bandpass. Likewise, outputs 3 and 4 will be linked together, and controlled in pages 4 through 6. Output 5 is the mono summed output designed to be the Subwoofer output, and it is controlled on pages 7 through 9.
4.Navigate to the linked Graphic EQ module on Inputs 1 and 2 by pressing the Input Channel A button and the EQ 1 button.
5.Edit the Graphic EQ parameters using the NEXT and PREV buttons to move between the pages. Once again, Input Channels A and B are linked so adjusting one actually adjusts them both.
6.Since the we’re already in the Input Channel A Graphic EQ, moving to the Stereo linked Compressor on these same channels requires just a single button press on the Insert 2 button.
7.Use the NEXT and/or PREV Page buttons to navigate to the various desired parameters.
8.Press the Output Channel 6 button and the MIX/ROUTE button to move to the Output Mixer on Output 6.
9.Make the changes by finding the Input channels A and B and adjusting their relative amounts using the Encoders.
10.Press the PRESET/RECALL button to return to the main preset screen.
DriveRack® 4800/4820 User Manual |
| 35 |
|
|