Setting up (continue)
4.The Channel List is displayed once scanning is nished. Press 
or 
to select channel and OK to start viewing.
Channel List
Channel |
| What's on Now | What's on Next | |
KTVU | Stored | Current program | Next program | |
KTVU | Stored | Current program | Next program | |
KRON Stored | Current program | Next program | ||
•You may also hide unwanted channels, refer to “Channel List” on page 8 for details.
Your Converter Box is now ready for use!
Tip: To continue to view
if available, press the BOX 
on your remote to place the Converter Box in
You must have the RF coaxial cable connected to your TV input, in order to watch
Program the supplied remote control
You can control TV sets of all major brands after programming the Converter Box remote control with the PGM key. RCA TV sets can be controlled directly without programming. Refer to the steps below and the separate Program Code leaet to guide you through the programming.
1.Refer to the Program Code at the last page of this booklet. Look for the brand of your TV set and a
Program codes/Códigos de programa
Admiral 002, 128, 183, 189
Advent 191, 258, 260, 275
Adventura 129
2.Press PGM on the remote control. The signal indicator on it remains lit.
signal indicator
3.Enter the
4. Press the volume keys on this remote control to check if they can adjust the volume of your TV set.
• If you fail to control your TV set,
repeat steps 2 to 4 to program again. Try another program code if there is more than one for your TV brand.
•If the signal indicator remains lit after blinking four times, you may have entered the wrong code. Repeat steps 3 to 4 to program again. Make sure you have correctly entered the code.
•You can still use your TV remote control to turn on your TV set, select input source and control the volume.
6
DTA800B1_IB_EN_E_V3