General controls
•The keys on the Converter Box remote control are divided into two parts. The keys
shown in white in the diagram below control the Converter Box, while the grey keys | EN | |
control your TV set. | ||
|
•You can control TV sets of all major brands after programming this remote control with the PGM key. RCA TV sets can be controlled directly without programming. Refer to “Program the supplied remote control” section for details.
TV controls ONLY
Turns the TV on or o
Selects CH3, CH4 or
AV INPUT channels on the TV
Mutes or restores sound output from the TV (if the TV
supports this function)
Adjusts the TV volume
Programs the remote control so that it can control your TV set.
Signal indicator
Turns the converter box on or o
Navigates through the converter box menus (e.g., to move right, press )
Press OK to conrm menu selections
Shows or hides channel information
(it is possible to receive some programs from dierent time zones, the time information might be wrong in this case)
Shows or hides the main menu Selects the previous or next channel
Selects channels by inputting the channel number
Shortcut keys to access functions in the main menu
Displays closed captioning from the converter box
Refer to “Program the supplied remote control” for details
Insert 2 “AAA” batteries prior to use.
Inputs a dash (e.g.,
7
DTA800B1_IB_EN_E_V3