Panasonic TH-C50FD18 quick start Menu Adjustments/Configurations options

■PC menu setting (change as desired)					to	(p. 24)
Making settings			“How to Use Menu Functions”
Menu		Item			Adjustments/Configurations (options)
			Reset	Resets PC adjust
			Sync	H & V: The H and V sync signals are input from the HD/VD connector. (p. 45)
				On G: Uses a synchronized signal on the Video G signal, which is input from the G
				connector. (p. 45)
			Dot clock	Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is
				blurred.
				Adjusts the horizontal position.
			H-position
Picture				Adjusts the vertical position.
	PC		V-position
	adjust
				Alleviates the problem if the whole picture appears to flicker or is blurred.
				First adjust the Dot Clock to get the best possible picture, then adjust the
			Clock phase	Clock Phase so that a clear picture appears.

	Note
	It may not be possible to display a clear picture due to poor input signals.
Input	Switches to wide display.
	Input signal switched from VGA to WVGA
resolution
	Input signal switched from XGA to WXGA
	Displays the H (Horizontal)/V (Vertical) frequencies.
H-frequency	Display range
V-frequency	Horizontal: 15 - 110 kHz
	Vertical: 48 - 120 Hz

Audio menu (p. 24)

For PC input, only audio signals can be output from PROG OUT terminals.

Viewing Displaying PC Screen on TV

23