Panasonic TH-65PF10WK, TH-50PF10WK manual Aspect Controls, Mode Picture Explanation

ASPECT Controls

The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture.

Press repeatedly to move through the aspect options:

4 : 3 Zoom 16 : 9

[from the unit]

INPUT MENU -/ VOL +/ ENTER/

Panasonic Auto Just

Note:

When selecting an input slot that attaches BNC Dual Video Terminal Board (TY-FB9BD), Panasonic Auto cannot be selected.

The aspect mode changes each time the ENTER button is pressed.

[During MULTI PIP Operations]		4 : 3	16 : 9
• Picture and Picture, Picture in Picture	:
• Others	:	Aspect switching is not possible.

Notes:

• For PC signal input, the mode switches between “4 : 3”, “Zoom” and “16 : 9” only.

•For a 1125 (1080) / 60i · 50i · 60p · 50p · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p signal input, the mode is set to “16 : 9” mode, and switching is not possible.

•Panasonic Auto can be selected only during Video signal input.

•The aspect mode is memorized separately for each input terminal.

Mode	Picture		Explanation
	4		4 : 3 will display a 4:3 picture at its standard 4:3 size.
	4 : 3
4 : 3	3
	4	16	Zoom mode magnifies the central section of the picture.
		Zoom
Zoom	3	9
	4	16	16 : 9 will display the picture at its maximum size but with slight
		16 : 9	elongation.
16 : 9	3	9
	4	16	Just mode will display a 4:3 picture at its maximum size but with
		Just	aspect correction applied to the center of the screen so that
Just	3	9	elongation is only apparent at the left and right edges of the screen.
			The size of the picture will depend on the original signal.
	4	16	The display will automatically become enlarged (depending on the
		Panasonic Auto	picture source), allowing you to view the picture at its maximum
	3	9	size.
			Notes:
			• Panasonic Auto mode is designed to automatically adjust the
	For an elongated image	Image is expanded	aspect ratio to handle a mix of 16:9 and 4:3 program material.
Panasonic			Certain 4:3 program material, such as stock market data screens,
	4	Changes in	may occasionally cause the image size to change unexpectedly.
Auto
		accordance with	When viewing such programs, it is recommended that the ASPECT
	3	the Panasonic Auto	be set to 4:3.
		mode setting (see	• If adjusting the Picture V-Pos/V-Size in Panasonic Auto with 16:9
			mode, the adjustment is not memorized. When exiting the mode,
		page 43).
			the screen will return to a former adjustment.
	For a 4:3 image
			• Panasonic Auto can not be selected while BNC Dual Video
			Terminal Board (TY-FB9BD) is installed.

Note:

Do not allow the picture to be displayed in 4:3 mode for an extended period, as this can cause a permanent image retention to remain on the Plasma Display Panel.

20