Setup for Input Signals
Component / RGB-in select
Select to match the signals from the source connected to the Component / RGB input terminals.
Y, PB, PR signals | “Component” | |
R, G, B, HD, VD signals | “RGB” |
1 |
|
|
| Press to display the Setup menu. | |
|
|
|
| ||
|
|
|
| ||
|
| ||||
2 |
|
|
| Press to select the “Component / | |
|
|
| select”. |
| |
|
|
|
| Press to select the desired input signal. | |
|
|
|
| Component | RGB |
|
| ||||
|
|
|
|
|
|
3 Press to exit from adjust mode.
Note:
Selection may not be possible, depending on which optional board is installed.
Setup | 1/2 |
Signal |
|
| |
| RGB |
Input label | PC |
Power save | Off |
Standby save | Off |
Power management | Off |
Auto power off | Off |
OSD Language | English (UK) |
3D Y/C Filter – For NTSC AV images
Select “Signal” from the “Setup” menu during AV(S Video) input signal. (“Signal [AV]” menu is displayed.)
1 | Press to select the “3D Y/C Filter (NTSC)” |
|
Press to set On / Off.
Setup | 1/2 |
Signal |
|
| |
| RGB |
Input label | PC |
Power save | Off |
Standby save | Off |
Power management | Off |
Auto power off | Off |
OSD Language | English (UK) |
2 Press to exit from adjust mode.
Note:
When On, this setting only affects NTSC input signals.
Press ACTION () button
| Signal | [ AV ] | |
|
|
| |
| 3D Y/C Filter (NTSC) | On |
|
|
|
|
|
| Colour system | Auto |
|
|
|
| |
| Cinema reality | Off |
|
|
|
|
|
| Panasonic Auto (4 : 3) | 4 : 3 |
|
|
|
| |
| Off |
|
41