Setup for MULTI DISPLAY
8 AI-synchronization
Adjusts brightness of displays when using MULTI DISPLAY.
Press to select | MULTI DISPLAY Setup |
| ||
Press to select “Off” , “On”. | MULTI DISPLAY Setup | Off | ||
The brightness depends on | Equalize the brightness of | Horizontal Scale | × 2 | |
Vertical Scale | × 2 | |||
|
| |||
each display’s setting. | all the displays. | Seam hides video | Off | |
Location | A1 | |||
|
| Off | ||
Note: | Off | On |
|
|
If you set
Picture menu: Colour, Hue
9
Press twice to exit from Setup.
ID Remote Control Function
You can set the remote control ID when you want to use this remote control on one of several different displays.
1
2
3
4
Switch 
to 
on the right side.
Press the 
button on the remote control.
Press one of 
- 
, 
for the tens digit setting.
Press one of 
- 
, 
for the units digit setting.
Notes:
• The numbers in 2, 3 and 4 should be set up quickly.
• Adjustable ID number range is 0 - 99.
•If a number button is pressed more than two times, the first two numbers become the ID number for the remote control.
ID remote control button operation
The operation is the same as normal remote control except for the 
button.
ID Cancellation
Press 
button on remote control. (This has the same effect as pressing the 
, 
, 
buttons at the same time.)
Notes:
•Set the Remote ID “On” to operate the ID remote control.
If remote ID is set to “On”, you can use the remote control without identical ID number during option menu display. (see page 47)
•The ID remote control cannot be used when ID select is set to anything other than 0, and the remote control ID is not the same as the ID select number (see page 47).
38