Panasonic TH-50PF10WK, TH-65PF10WK manual Options Adjustments, Effect Adjustments

Page 45

Options Adjustments

1

2

3

4

Press to display the Setup menu.

Press to select “OSD Language”.

Press and hold until the Options menu is displayed. Press to select your preferred menu.

5

6

Press to adjust the menu.

Press to exit from Options menu.

Options

1/3

Weekly Command Timer

Onscreen display		On

Initial INPUT		Off

Initial VOL level	Off	0

Maximum VOL level	Off	0

INPUT lock		Off

Button lock		Off

Remocon User level		Off

Advanced PIP		Off

Item		Effect							Adjustments
Weekly
Command					Sets Weekly Command Timer. (see page 49)
Command					Sets Weekly Command Timer. (see page 49)
Timer
					On: Displays all the following on screen.
					• Power on display
Onscreen					• Input signal switch display
display	On		Off		• No signal display
					• Mute and the remaining time of off-timer after was pressed.
					Off: Hides all the items above from view.

					Off	PC	INPUT1	INPUT2	INPUT3
					Adjusts the input signal when the unit is turned on.
					Notes:
Initial INPUT					• Only the adjusted signal is displayed. (see page 15)
Initial INPUT					• Signal can be displayed when the Terminal board is installed.

					• This menu is available only when “INPUT lock” is “Off”.
					• When a dual input terminal board is attached, A or B is displayed depending on the selected
					input signal. (Ex. INPUT1A, INPUT1B)

45

Image 45

Contents Operating Instructions High Deﬁnition Plasma DisplayModel No. TH-50PF10WK EnglishTable of Contents Trademark Credits Important Safety NoticeSetup Safety PrecautionsDo not place any objects on top of the Plasma Display Transport only in upright positionSafety Precautions When using the Plasma DisplayIf problems occur during use Electric shocks can result if this is not done Clean the power cable regularly to prevent it becoming dustyAccessories Accessories SupplyRemote Control Batteries AC cord ﬁxing ConnectionsMonitor terminal SeeOptional Terminal ConnectionsBoard Insert Slot Equivalent of Dual Covered HDMITerminal Board BNC Component VideoPC Input Terminals connection Signal Names for Mini D-sub 15P ConnectorSerial Terminals connection CommandRS-232C Straight cable Communication parametersComponent / RGB connection Hdmi connectionPower On / Off Connecting the AC cord plug to the Plasma DisplayConnecting the plug to the Wall Outlet Power On / Off Selecting the input signal Initial selectionsSelecting the On-Screen Menu Language Main Power On / Off Switch Power Indicator Remote control sensor Volume AdjustmentBasic Controls Menu Screen on / OFFBasic Controls On-Screen Menu Displays On-Screen Menu Displays Aspect Controls Mode Picture ExplanationNormalisation Adjusting Pos. /SizeAdjusting Pos. /Size Normal Viewing Multi PIPOptions1/3 Advanced PIPNormal Picture AdjustmentsDynamic CinemaPicture Adjustments Advanced settingsSound Adjustment SDI Sound Output Sound AdjustmentMute On OffDisplay the operation guide Digital ZoomSelect the area of the image to be enlarged Select the magniﬁcation required for the enlarged displayPresent Time Setup Present Time Setup / Set up TimerPress to setup DAY or Present Time Button ForwardPresent Time Setup / Set up Timer Set up TimerDisplay the Set up Timer screen Press to select Power on Time / Power OFF TimeStart setting Mode selectionScreensaver For preventing image retention Reversal / Scroll selectionSetup of Screensaver Time Reduces screen image retentionScreensaver For preventing image retention Side Panel Adjustment Customizing the Input labels Reduces power consumptionAddition sign Selected Input CompositeHow to Setup Multi Display Setup for Multi DisplayDisplay Number locations for each arrangement Examples Setup for Multi DisplayID remote control button operation ID Remote Control FunctionID Cancellation AI-synchronizationHow to setup Portrait Set up for PortraitViewing Area / Location Set up for PortraitSetup for Input Signals Component / RGB-in select3D Y/C Filter For Ntsc AV images Press Action button Press to exit from adjust Mode Setup for Input SignalsNR / Block NR / Mosquito NR Refresh RateCinema reality Colour system / Panasonic AutoPress to exit from adjust mode Press Action Button Setting RGB sync signalSync Freq. kHz / V-Freq. HzEffect Adjustments Options AdjustmentsOptions1/3 Options AdjustmentsOff-timer Normalization Weekly Command Timer Press to select Time / Command Shipping condition Plasma Display panel TroubleshootingCOMPONENT/RGB/PC/VIDEO input signals COMPONENT/RGB/PC/VIDEO input signals Video input HdmiMHz Active pixels Pixels Active lines Lines Command list of Weekly Command Timer TH-50PF10WK TH-65PF10WK SpeciﬁcationsMemo Memo Memo Customer’s Record