Panasonic TH-37PR10UA, TH-42PR10UA Off Initial VOL Sets normal volume Level, Off MENU&ENTER On

Options Adjustments

Options 1/3

Weekly Command Timer

Onscreen display		On
Initial INPUT		Off
Initial VOL level	Off	0
Maximum VOL level	Off	0
INPUT lock		Off
Button lock		Off
Remocon User level		Off
Advanced PIP		Off

Item Effect Adjustments

Press button to adjust the volume when the unit is turned on.

		Off	On
Initial VOL		Off:	Sets normal volume.
level	Off On	On:	Sets your preferred volume.
		Notes:

•When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.

•You can hear the changed volume regardless of your volume setting before opening the options menu if you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.

Press button to adjust the maximum volume.

			Off	On
			Off:	Sets auto maximum volume.
Maximum VOL			On:	Sets your preferred maximum volume.
level	Off	On	Notes:
			• If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level” automatically
			becomes the same as the “Maximum VOL level”.
			• The volume display can go up to 63 regardless of the settings.
			• You can hear the changed volume regardless of your volume setting before opening the options menu
			if you adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu.
			Off	PC	INPUT1	INPUT2	INPUT3
			Locks the input switch operation.
			Notes:
			• Only the adjusted signal is displayed. (see page 13)
INPUT lock			• Signal can be displayed when the Terminal board is installed.
			• Input switch can be used when this is set to “Off”.

•In two screen display mode, if anything other than “Off” is set, the value will be fixed as the value input in the single screen display mode.

•When a dual input terminal board is attached, A or B is displayed depending on the selected input signal. (Ex. INPUT1A, INPUT1B)

Off MENU&ENTER On

Off: All the buttons at the bottom of the main unit can be used.

MENU&ENTER: Locks and buttons on bottom face of main unit.

	On:			MENU		ENTER/
Button lock		Locks all the button on bottom face of main unit.
	Sets Button lock with the unit buttons in the following procedure.
	Off: Press		four times→Press INPUT				four times→Press		four times→Press ENTER/
	MENU&ENTER: Press ENTER/				four times→Press			four times→Press INPUT four times→Press ENTER/
	On: Press		four times→Press ENTER/ four times→Press						four times→Press ENTER/
	Off	User1		User2			User3
Remocon	Off:	You can use all of the buttons on the remote control.
	User1:You can only use				,	,	,	, ,	, ,	buttons on the remote control.
User level	User2:You can only use				,	, buttons on the remote control.

User3:Locks all the buttons on remote control.

	Off:		Sets normal two screen display mode (see page 20).
	On:		Sets Advanced PIP mode (see page 21).
Advanced PIP	Notes:
	Off On • When “INPUT lock” is “On”, you cannot use all the two screen display functions.
	•	,	buttons are unavailable during Advanced PIP mode operation.

36