Panasonic TH-42PR10UA operating instructions Connections, AC cord connection see, AC cord fixing

Page 9

Connections

AC cord connection (see page 12)

– AC cord fixing

Close

1
	Push until
	the hook
1 Plug the AC cord into	clicks.
1 Plug the AC cord into
the display unit.	Open
Plug the AC cord until	Open
it clicks.	2. Pull off.

22 Fix the AC cord with the clamper which is

Note:	attached to the unit.
Make sure that the AC cord is locked		1. Keep the
on both the left and right sides.
		knob pressed.

–Cable fixing bands Secure any excess cables with bands as required.

Unplug the AC cord

Unplug theAC cord pressing the two knobs.

Note:

When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet first.

Pass the attached cable fixing band through the clip as shown in the figure.

To secure cables connected to Terminals, wrap the cable fixing band around them then pass the pointed end through the locking block, as shown in the figure.

While ensuring there is sufficient slack in cables to minimize stress (especially in the power cord), firmly bind all cables with the supplied fixing band.

1

2

To tighten:	To loosen:
	Push the catch
Pull

Pull

AUDIO

SLOT1

SLOT2

SLOT3

PC IN

SERIAL

Optional Terminal Board Insert Slot (covered)

From EXTERNAL monitor terminal on Computer (see page 10)

From SERIAL Terminal on Computer (see page 11)

9

Image 9

Contents Operating Instructions Manual de instrucciones English EspañolModel No. Número de modelo Risk of Electric Shock Do not Open Important Safety Instructions Table of Contents FCC Caution Canadian NoticeTrademark Credits When using the Plasma Display Safety PrecautionsSetup MaintenanceAC Power Supply Cord If problems occur during useAccessories Accessories SuppliedCheck that you have the Accessories and items shown AC cord connection see ConnectionsAC cord fixing Optional Terminal Board Insert Slot coveredPC Input Terminals connection Signal Names for Mini D-sub 15P ConnectorSerial Terminals connection CommandCommunication parameters Basic format for control dataPower on / OFF Connecting the AC cord plug to the Plasma DisplayConnecting the plug to the Wall Outlet Initial selections Selecting the input signalSelecting the On-Screen Menu Language INPUT1 INPUT2 INPUT3 PCOn OFF Basic ControlsVolume Adjustment Channel AdjustmentOFF Timer button Digital Zoom see Press to accessAdvanced Settings Picture Setup SoundOn-Screen Menu Displays On Time / Power OFF Time / Power OFF TimeNormal Zoom Full Aspect ControlsIs pressed During Multi PIP Operations Normal FullClock Phase Adjusting POS. /SIZEClock Phase RGB/PC in modeMulti PIP One screen Advanced PIP Press to exit from Options menu Advanced PIPSub screen Main screen 1366x768@60Hz RGB, DVI, HdmiStandard Picture AdjustmentsDynamic CinemaAdvanced Settings Mute Sound AdjustmentDisplay the operation guide Digital ZoomPosition Select the magnification required for the enlarged displayPresent Time Setup Present Time SetupPress to set up DAY or Present Time of DAY Button ForwardSET UP Timer Display the SET UP Timer Screen Press to selectPower on Time / Power OFF Time Start setting Mode selectionScreensaver For preventing image retention Negative / Scroll selectionReduces screen image retention Setup of Screensaver TimeSide BAR Adjust OFF Dark MID BrightPress to exit from Screensaver Reduces power consumption Customizing the Input labelsAddition sign Selected Input Component / RGB in Select SET UP for Input Signals3D Y/C Filter For Ntsc AV images Component RGBColor System / Panasonic Auto Pulldown / Video NRColor System Sync Setting RGB sync signalRefresh Rate FREQ. kHz / V-FREQ. HzOptions Adjustments Volume display can go up to 63 regardless of the settings Off Initial VOL Sets normal volume LevelBecomes the same as the Maximum VOL level Off MENU&ENTER OnInitial Power EnableFunction Normal StandbyState regardless of the slot power setting Installation NormalizationRotate Off Does not rotate the image Weekly Command Timer Press to select Time / Command Press to select a command numberTime Set the time to execute a command program Press to set each itemShipping condition Troubleshooting Symptoms ChecksPlasma Display panel RGB PC input signalsCommand list of Weekly Command Timer Specifications For the U.S.A For Canada Page Customer’s Record