Panasonic BT-LT2600 manual Function Display

Main Menu (continued)

FUNCTION

		The underlined values are factory preset setting values.
Sub menu	Settings	Explanation
FUNCTION 1 –	<HV DELAY>	Used to select the functions to be assigned to individual
FUNCTION 5	<AUTOSETUP>	buttons [FUNCTION1] to [FUNCTION5] (front-panel buttons).
	<BLUE ONLY>	<HV DELAY>
	<GAMMA SELECT>	Displays the synchronizing signal (horizontal, vertical).
	<SD ASPECT>	The display is switched in the following order.
	<SCAN>	DELAY OFF J V DELAY J H DELAY J HV DELAY J
	<SUB WINDOW>	DELAY OFF
	<WFM>	<AUTOSETUP>
		Used to automatically adjust the PC display.
	<MARKER>
		<BLUE ONLY>
	<PIXEL TO PIXEL>
		Used to cut the red and green signals. You can check the hue
	<PIXEL POS.>
		(PHASE) and depth of color (CHROMA). This is switched
	<LEVEL METER>
		between ON/OFF by pushing the button.
	<MONO>
		<GAMMA SELECT>
	<UNDEF>
		Used to display the gamma curve.
		The display changes in the following order.
		GAMMA STANDARD J GAMMA FILM J
		GAMMA STDIO/PST J GAMMA STANDARD
		<SD ASPECT>
		Used to switch between “16:9” and “4:3”.*1
	(Factory preset	<SCAN>
		You can switch between “UNDER SCAN” and “NORMAL
	settings
		SCAN”.*1
	FUNCTION1:	<SUB WINDOW>
	MARKER
		You can perform the settings for 2 screen display mode.*1
	FUNCTION2:	The display changes in the following order.
	WFM
		SINGLE J FULL/PARTJ STILLJ SINGLE
	FUNCTION3:
		<WFM>
	LEVEL METER
		Used to display the wave form monitor.
	FUNCTION4:
		<MARKER>
	PIXEL TO PIXEL
		Used to switch the marker on and off.
	FUNCTION5:
		<PIXEL TO PIXEL>
	PIXEL POS.)
		Used to switch the display between the input size and display
		size.
		<PIXEL POS.>
		Used to set the signal display position when PIXEL TO PIXEL
		is on.
		<LEVEL METER>
		Used to switch the AUDIOMETER display.
		The display changes in the following order.
		METER 8CH J METER 4CH J METER 2CH J OFFJ
		METER 8CH
		<MONO>
		Used to switch the display between color and black-and-
		white.
		<UNDEF>
		No settings
FUNCTION DISPLAY	<ON>	Used to make display settings for the functions assigned to
	<OFF>	individual buttons [FUNCTION1] to [FUNCTION5] (front-
		panel buttons).
		<ON>
		The selected function is displayed.
		<OFF>
		The selected function is not displayed.

*1 If these settings are changed, the menu settings will also change.

22