Main Menu (continued)
g“PHASE” and “CLOCK” factory preset setting values
FORMAT | CLOCK | PHASE | FORMAT | CLOCK | PHASE |
|
|
|
|
|
|
640x400(70Hz) | 800 | 18 | 1024x768(60Hz) | 1344 | 1 |
|
|
|
|
|
|
640x480(60Hz) | 800 | 18 | 1024x768(70Hz) | 1328 | 21 |
|
|
|
|
|
|
640x480(75Hz) | 840 | 10 | 1024x768(75Hz) | 1312 | 9 |
|
|
|
|
|
|
640x480(85Hz) | 832 | 5 | 1024x768(85Hz) | 1376 | 9 |
|
|
|
|
|
|
800x600(60Hz) | 1056 | 27 | 1280x768(60Hz) | 1728 | 1 |
|
|
|
|
|
|
800x600(75Hz) | 1056 | 7 | 1280x768(75Hz) | 1712 | 22 |
|
|
|
|
|
|
800x600(85Hz) | 1048 | 24 | 1280x1024(60Hz) | 1688 | 12 |
|
|
|
|
|
|
AUDIO
Adjusting the speaker output.
|
| The underlined values are factory preset setting values. |
|
|
|
Sub menu | Settings | Explanation |
|
|
|
INPUT | <AUTO> | Used to select speaker output. |
SELECT | <ANALOG> | <AUTO> When SDI input line is selected with [INPUT SELECT] on the front |
|
| panel: |
|
| embedded audio (SDI terminal) |
|
| When an input line other than SDI1 and SDI2 is selected with |
|
| [INPUT SELECT] on the front panel: |
|
| analog (AUDIO input terminal) |
|
| <ANALOG> Analog (AUDIO input terminal) |
|
|
|
EMBEDDED | Used to select the audio channel of the embedded audio outputted to the left | |
SELECT L | (Factory preset | speaker. |
| setting: CH1) |
|
|
|
|
EMBEDDED | Used to select the audio channel of the embedded audio outputted to the | |
SELECT R | (Factory preset | right speaker. |
| setting: CH2) |
|
|
|
|
LEVEL | <OFF> | Used to select the embedded audio meter for |
METER*1 | <8CH> |
|
| <4CH> |
|
| <2CH> |
|
|
|
|
0dB POINT | <ON> | Used to switch the 0 dB line displayed on the meter on and off. |
| <OFF> |
|
|
|
|
CH | <ON> | Used to switch the channel displayed on the meter on and off. |
| <OFF> |
|
|
|
|
*1 When speaker output set in “INPUT SELECT” menu is analog, the level meter does not move regardless of its display status.
28