About HV Delay, About the SUB Window, Full

Main Menu (continued)

g About HV DELAY

This displays the video blanking period. By pushing the button, you can switch through the H blanking display J V blanking display J H and V blanking display J no blanking display.

g About the SUB WINDOW

You can compare saved still and moving images by using the “SUB WINDOW” function to separate the main window into 2 displays as shown below.

Depending on the settings of the “SUB WINDOW” (FULL, PART) in the “SYSTEM CONFIG” menu (J page 21) it can be switched as shown below.

The display changes each time you press one of the buttons, [FUNCTION1] to [FUNCTION5] (J page 22), assigned with the [SUB WINDOW] function. (To use the “SUB WINDOW” function, you must assign it to one of the [FUNCTION1] to [FUNCTION5] buttons.)

When setting “I-P MODE” function (J page 19),

1)change the setting after releasing “SUB WINDOW” function. 2)we recommand “MODE2” for the image with a fast movement.

•FULL

The main window is reduced and made into 2 sub window (sub window+sub window).

Press the FUNCTION button assigned with the SUB WINDOW function.

Normal window (main window)

moving image

Before inputting the image	After inputting the image
(sub window+sub window)	(sub window+sub window)

Press the		Press the
same button		same button
again.		again.
moving image	moving image	still image	moving image

•PART

Only the sub window size is cut out of the main window, and the cut section is made into 2 sub window images (sub window+sub window).

Press the FUNCTION button assigned with the SUB WINDOW function.

Normal window	Before inputting the image	After inputting the image
(main window)	(sub window+sub window)	(sub window+sub window)

Press the		Press the
same button		same button
again.		again.
moving image	moving image moving image	still image	moving image

The central section is cut out	Lines up and	displays the
	section cut out of the main
	window	The window is displayed in 16:9 aspect.

Precautions when selecting FULL/PART

This function compares screens with the same input terminal and same format. If different input formats, or if signals are input between different input channels, the sub-window (left side, still image) becomes blurred and blanking occurs. However, if the same format signals are input into the input terminal when acquiring the still image, the images will be displayed correctly.