Panasonic BT-LT2600 Color TEMP.*1, Gain RED, Gain Green, Gain Blue, Bias RED, Bias Green, Reset

Main Menu (continued)

3

About IP Mode

By selecting “MODE1”, you can convert IP through Frame Interpolation.

This unit has reduced the Frame Interpolation delay to 1 field or less, compared to our old models having caused 1 frame delay or more.

Factory preset setting value is “MODE1” recommended for normal use. Depending on images, in very rare cases, noise may occur on the screen. In such a case, “MODE 2” is recommended.

By selecting “MODE2”, you can convert IP through Field Interpolation.

Depending on still images, etc., flickers may occur on the screen. In such a case, “MODE 1” is recommended.

g WB adjustment mode

You can adjust “WHITE BALANCE VAR1” – “WHITE BALANCE VAR3” (WB) by selecting “VAR1” – “VAR3” in “COLOR TEMP.” in the “VIDEO CONFIG” menu.

		The underlined values are factory preset setting values.
Sub menu	Settings	Explanation
COLOR TEMP.*1	<USER0–63>	Used to select the color temperature that will become the
	<D93>	basis for adjustments.
	<D65>	<USER0–63>		Adjustable settings 0–63 (color
	<D56>			temperature around 3000K–9300K)
		<D93>	Color temperature around 9300K
		<D65>	Color temperature around 6500K
		<D56>	Color temperature around 5600K
GAIN RED	<0–511>	GAIN elements for RED are adjusted.*2
	(Factory presets are values
GAIN GREEN		GAIN elements for GREEN are adjusted.*2
	for color temperature <D65>.)
GAIN BLUE		GAIN elements for BLUE are adjusted.*2
	* The presets are values
	adjusted before shipment
	from factories.
BIAS RED	<-512–511>	BIAS elements for RED are adjusted.*2
	(Factory preset settings: 0)
BIAS GREEN		BIAS elements for GREEN are adjusted.*2
BIAS BLUE		BIAS elements for BLUE are adjusted.*2
RESET		“GAIN RED” – “BIAS BLUE” values are reset to color
		temperatures values selected in “COLOR TEMP.”.

*1 When “COLOR TEMP.” is selected and [ENTER] is pressed following item change, the display changes to the confirmation screen. Selecting “YES” and pressing [ENTER] on this screen return GAIN and BIAS values to the selected color temperature values.

*2 When adjusting, the item display moves to the lower part of the screen.

20