Panasonic BT-LT2600 manual Marker

Main Menu (continued)

MARKER

			The underlined values are factory preset setting values.
Sub menu	Settings	Explanation
MARKER	<OFF>*1	Used to make MARKER settings effective.
	<ON >
16:9*2*3	<OFF>	Used to select/display the type of marker when the aspect ratio
	<4:3 >	setting is 16:9.
	<13:9>	<OFF>	Marker not displayed.
	<14:9>
		<4:3>	4:3 marker	<13:9>	13:9 marker
	<CNSCO>
		<14:9>	14:9 marker	<CNSCO> CNSCO marker
	<VISTA>
		<VISTA> VISTA marker		<95%>	95% Area marker
	<95%>
		<93%>	93% Area marker	<90%>	90% Area marker
	<93%>
		<88%>	88% Area marker	<80%>	80% Area marker
	<90%>
	<88%>
	<80%>
4:3*2*4	<OFF>	Used to select/display the type of marker when the aspect ratio
	<95%>	setting is 4:3.
	<93%>	<OFF>	Marker not displayed.
	<90%>
		<95%>	95% Area marker	<93%>	93% Area marker
	<88%>
		<90%>	90% Area marker	<88%>	88% Area marker
	<80%>
		<80%>	80% Area marker
BACK*2	<NORMAL>	Used to select the background brightness excluding the marker.
	<HALF>	<NORMAL> Normal background
	<BLACK>	<HALF>	Background brightness 50%
		<BLACK>	Background brightness 0% (Black)
CENTER*2	<OFF>	Used to display the center marker.
	<ON>	<OFF>	Not displayed
		<ON>	Displayed
GPI PRESET1*5	<4:3>	GPI PRESET1: Used to select the marker to be displayed using the
	<13:9>	GPI terminal “MARKER1 ON/OFF” operation (J page 30).
	<14:9>
	<CNSCO>	GPI PRESET2: Used to select the marker to be displayed using the
	<VISTA>	GPI terminal “MARKER2 ON/OFF” operation (J page 30).
	<95% (16:9)>
GPI PRESET2*5		<4:3>	4:3 marker
	<93% (16:9)>
		<13:9>	13:9 marker
	<90% (16:9)>
		<14:9>	14:9 marker
	<88% (16:9)>
		<CNSCO> CNSCO marker
	<80% (16:9)>
		<VISTA>	VISTA marker
	<95% (4:3)>
		<95% (16:9)> 95% Area marker when the aspect ratio is 16:9.
	<93% (4:3)>
		<93% (16:9)> 93% Area marker when the aspect ratio is 16:9.
	<90% (4:3)>
		<90% (16:9)> 90% Area marker when the aspect ratio is 16:9.
	<88% (4:3)>
		<88% (16:9)> 88% Area marker when the aspect ratio is 16:9.
	<80% (4:3)>
		<80% (16:9)> 80% Area marker when the aspect ratio is 16:9.
		<95% (4:3)> 95% Area marker when the aspect ratio is 4:3.
		<93% (4:3)> 93% Area marker when the aspect ratio is 4:3.
		<90% (4:3)> 90% Area marker when the aspect ratio is 4:3.
		<88% (4:3)> 88% Area marker when the aspect ratio is 4:3.
		<80% (4:3)> 80% Area marker when the aspect ratio is 4:3.

*1 The setting becomes “On” when the unit receives marker-related control during REMOTE operation. (Priority goes to GPI when GPI settings exist.)

*2 When controlling the marker settings using the GPI function (J page 30), these settings become disabled. These are not operated when the 2 screens are displayed.

*3 These are only enabled when the HD signal and SD signal aspect ratio settings are 16:9.

*4 These are only enabled when the SD signal aspect ratio setting is 4:3.

*5 When setting “GPI PRESET1” or “GPI PRESET2” using GPI function, the REMOTE function depending RC- 232C becomes disabled (error response: ER001).

17