Chapter 6: Using the TV’s features
Note: A closed caption signal may not display in the following situations:
•When a videotape has been dubbed
•When the signal reception is weak
•When the signal reception is
Closed Caption Reception Adjustment
If reception is weak, the picture may appear blurred, and captions or text may not appear clearly on the screen. In this case, use this function to make them appear clearer.
1 Press Yand open the Function menu.
2 Press B or b to highlight CC Reception Adjustment. 3 Press C or c to select mode 1 or 2.
Function | 1/2 | |
CC | C1 |
|
|
| |
CC Reception Adjustment | Mode 1 |
|
Favorite Channel | ENTER | |
Auto Aspect | On | |
Blue Screen | On | |
Side Panel | 1 |
|
|
|
|
MENU Back EXIT Exit |
|
|
Note:
•This function may not be available in some cases.
•The function is available when the TV is in ANT mode only. The Closed Caption Reception Adjustment function may display the captions more clearly.
Adjusting the audio
Muting the sound
Press Wto partially reduce (1/2 MUTE) or turn off (MUTE) the sound. Each time you press W, the mute mode will change in the following order:
1/2 Mute 
Mute 
Volume 
If the closed caption mode is set to Off when you select “MUTE” mode, the closed caption feature is automatically activated. To mute the audio without automatically activating the closed caption feature, use Zto set the volume to 0. See “Using the closed caption mode” on page 37 for more information on closed caption modes.
Selecting stereo/SAP broadcasts
The
The MTS feature is not available when the TV is in VIDEO mode. When the TV receives a stereo or SAP broadcast, the word “STEREO” or “SAP” appears
To listen to stereo sound:
1 Press Yand open the Audio menu.
2 Press B or b to highlight MTS.
3 Press C or c to select Stereo.
| Audio | |
|
|
|
MTS |
| Stereo |
|
|
|
Bass |
| 0 |
|
|
|
Treble | 0 | |
|
|
|
Balance | 0 | |
|
|
|
WOW |
| ENTER |
|
|
|
StableSound |
| On |
|
|
|
MENU Back | EXIT Exit | |
Note:
•You can leave the MTS feature in Stereo mode and it will automatically output the type of sound being broadcast (stereo or monaural).
•If the stereo sound is noisy, select Mono to reduce the noise.
To listen to a second audio program on an analog station (if available):
Select SAP in step 3 above.
Note:
•A second audio program (SAP) can be heard only on those TV stations that offer it. For example, a station might broadcast another language as a second audio program. If you have SAP on, you will see the current program on the screen but hear the other language instead of the program’s normal audio.
•If you have SAP on and the station you are watching is not broadcasting a second audio program, the station’s normal audio will be output. However, occasionally there is no sound at all in SAP mode. If this happens, set the MTS feature to Stereo mode.
38